Description
Comparison points and tradeoffs
When comparing Go Kart Forward Reverse 212cc Gear Box, 30 Series Torque Converter, 10T #40/41 12T #35 Go Karts Accessories GELUOXI with other Torque Converters options, use this source-backed detail as the primary discriminator: Adjust tack positions as required for adequate fit 8) Weld everything in place.
Use this second fact to evaluate the tradeoff: Application note: Adjust tack positions as required for adequate fit 8) Weld everything in place. A third point to compare across alternatives is: Category: Replacement Parts / Transmission & Drive Train / Torque Converters.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
✔Product Type
Gearbox Kit 30 Series
✔Specifications
Material: Metal
Shaft Size: 5/8″ with 3/16″ keyway
Shaft size: for driven clutch is 5/8” with 3/16” keyway
Forward Ratio: 1:1:3
Reverse Ratio: 1:2:6
Gearbox Speed: 5/13 of the Clutch speed
Shifter Cable Length: 1540mm ( 5′ ) ( 60” )
3 shift models:forward,reverse, neutral
✔Wide Application
For Go-Karts, Utility Vehicles and other Application with Engines up to 11HP
with 12T #35 chain and 10T #40/ 41/ 420 Chain
✔Package Includes
1 X Forward/Reverse Gearbox with 3/16″ Keyway
2 X Mounting Plates
1 X Shifter Disc
2 X Shifter Cable
1 X 10T and 12T Sprocket
1 X Shifter Assembly
✔How to Install
1) Remove existing clutch and driven pully from Kart. Cut rear protector bar off
2) Remove spacer ring from driven pully housing (silver, drivers side). Place on drive shaft next to existing brass spacer bushing
3) use two angle iron. Drill hole for 8mm bolt towards back top of each (for mounting of transmission).
4) Align drive sprocket with trans sprocket. Tack into place
5) Attached upper adjustment saddle (the gold “U” with a threaded rod sticking out.
6) Place a sleeve over this rod and, one aligned, weld to the top of the sleeve that previously held the driven pully shaft removed in step 1
7) Confirm chain length with new section of roller chain. Adjust tack positions as required for adequate fit
8) Weld everything in place.
9) Use belt, and attach chain/pullies/belt
10) Use some sort of “L” bracket to secure shifter in appropriate position, being sure to attach cables to it before install
11) run cables back to trans, attach, make final adjustments.
12) (optional) weld rear protector bar back on as you please. This makes lifting the rear of the kart so much easier.
Source product highlights
- 🔗Product Type:Gearbox Kit
- 🔗Wide Application: For Go-Karts, Utility Vehicles and other Application with Engines up to 11HP, Comes with 12T #35 chain and 10T #40/ 41/ 420 Chain
- 🔗Three Shift Modes: This kit has three shift models: forward,reverse and neutral,which is for more convenient and easy operation.Made of high-quality metal,features with durable and lightweight for a long use life.Please contact us if you have any questions
- 🔗Complete Accessories: 1x Forward / Reverse Gearbox with 3/16″ Keyway;2x Mounting Plates;1x Shifter Disc;2x Shifter Cable;1x 10T and 12T Sprocket;1x Shifter Assembly
- 🔗Buy with Confidence: Please contact us to confirm the application before purchase. Installation under professional instruction is recommended. Warranty for 2 years, any issue would be solved immediately, please feel free to contact us.
Reviews
There are no reviews yet.