Description
Comparison points and tradeoffs
When comparing Motorcycle Vacuum Carburetor Synchronizer Carb Sync Gauge Kit 4 Cylinder Compatible with BMW Honda Yamaha Kawasaki Suzuki GS KZ XS CB 550 650 750, Carb Balancer Synchronization Gauge Tool Set with other Carburetors options, use this source-backed detail as the primary discriminator: Compatible with Honda, compatible with Suzuki, compatible with Kawasaki, compatible with Yamaha, etc. It can also be used for most motorcycle, racing and automotive A/C vacuum motors with standard 2 to 4 carburetor systems, as well as some motorcycles that require a 6mm adapter.
Use this second fact to evaluate the tradeoff: 1. This vacuum carburetor synchronous instrument is made of high quality material. A third point to compare across alternatives is: Item model number : PSA028.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
- Product Dimensions
:
17.72 x 11.02 x 3.54 inches; 5.73 Pounds - Item model number
:
PSA028 - Date First Available
:
April 4, 2024 - Manufacturer
:
DHA - ASIN
:
B0CZSNDWVF - Country of Origin
:
China - Best Sellers Rank: #40,340 in Automotive (See Top 100 in Automotive)
- #113 in Powersports Carburetors
Product Description
Description :
1. This vacuum carburetor synchronous instrument is made of high quality material.
2. All hardware is finished with high quality chrome instead of brass for longer life, greater corrosion resistance and better flow accuracy.
3. Air flow control is manipulated by needle and seat valves instead of buttons.
This helps resist the “bounce” dial indicator associated with many other inferior gauges. The set comes with a black storage case.
4. This kit allows you to synchronize the values of the 4 carburetors as well as adjust/adjust them.
5. Convenient Storage: Sturdy plastic carrying case for easy transport, storage and organization.
6. Comes with a set of long and short adapters and connectors for easy access.
7. This tool kit comes in a sturdy plastic carrying case
With a handle and front locks for easy carrying, convenient storage and organization
Package List 4 X 3-1/2″ Synchronizer Gauges with Fixed Plate (vacuum) 4 X Rubber Pipes 8x5x750mm 4 X Tubes of Extension 3.9x52mm and 4 Tubes 3.9x122mm 8 X Tubes of Conical Type Connector 8x40mm 4 X Tubes 10x53mm ( M6x0.75) 4 X Tubes 10x60mm ( M6x1.0)
Each gauge has its own individual damping control and calibration control. Gauges are mounted to a heavy metal base intended for bench top use. It comes with both 5mm and 6mm adapters, will work with all bike models includes Yamaha which requires 6mm adapters.
Compatible with Honda, compatible with Suzuki, compatible with Kawasaki, compatible with Yamaha, etc. It can also be used for most motorcycle, racing and automotive A/C vacuum motors with standard 2 to 4 carburetor systems, as well as some motorcycles that require a 6mm adapter.
Source product highlights
About this item
- Carb balancer synchronization gauge is designed for Gs Kz 550 650 750, however, can also be used for most standard 2 to 4 carburetor systems and works on your motorcycle, race car, boat outboard and auto A/C vacuum motor; This carb tuner synchronizer tool can even help to regulate your fuel pressure.
- This motorcycle tool kit lets you synchronise the values of up to 4 carburettors as well as adjust and set them. It features 4 precision gauges,each gauge has its own individual damping control and calibration control. Supplied with set of long and short carburettor adaptors and connectors for easy access.
- Throttle body vacuum synchronizer tool, this vacuum carburetor synchronization balancer gauge carb synchronizer adjustment tool kit is built for strength, durability, and longevity; Metal construction and glass lens make the carburetor synchronizing gauges durable and easy to read; the carburetor adjustment gauge dials are mounted to a heavy metal base that can be mounted on a table or post, or hung in your garage for easy use.
- Make sure all the gauges are calibrated to 0. If the needle on the gauge is not pointed at 0. Open the metal cap, and use a flat head screwdriver to rotate the screw on the gauge face to adjust the pointer to 0 or the position desired.
- Synchronizer Gauges: includes 4 synchronizer gauges 1/2″ with fixed plates (vacuums) and 4 rubber pipes 8mm x 5mm x 750mm. /Extension and Connector Tubes: includes 4 extension tubes 3.9 x 52mm, 4 tubes 3.9 x 122mm, and 8 tubes with conical type connectors 8mm x 40mm. /Additional Tubes: includes 4 tubes 10mm x 53mm (M6 x 0.75) and 4 tubes 10mm x 60mm (M6 x 1.0).
Jerry Leonardi jr –
Very good quality product works great I just love it
Ted Long –
Well-made, complete set of carb synch gauges. Seems to have just about any hardware hook up fitting needed to synchronize 4 carbs on just about any motorcycle. When tested, using a hand pump (pressure and vacuum) at room temperature, all gauges appeared to be working properly and accurately calibrated. There are hose clamps, to make sure that the connection to your carbs and fittings is airtight, but I really don’t see where they are needed. This set replaces an older name brand carb synch set (much higher priced), where one of the gauges never worked properly. Previously, only having three working gauges was ok as I only needed to synch two carbs at a time on a couple of twin cylinder bikes. But using my old set to synchronize 4 carbs at one time wasn’t possible. I also like the large easy to read dials on these gauges, which are much larger than my old set. This set comes with a sturdy hard case which will help prevent it from being destroyed in my well-packed garage.
Kosta Ware –
If you ride an older bike like I do, The carbs sometimes just need a good syncing. This is a great tool to have around for that. Super easy to use. And they seem to be fairly accurate. Love the case they came in. And it came with all the hoses and attachments I needed for my bike. Very happy
W. Byrum –
My review of the DHA Motorcycle Vacuum Carburetor Synchronizer Carb Sync Gauge 4 Cylinder Compatible with BMW Honda Yamaha Kawasaki Suzuki GS KZ XS CB 550 650 750, Carb Balancer Synchronization Gauge Tool Set.First of all this is a very nice setup. This kit comes with several adapters and hoses that make it compatible with a wide variety of motorcycle engines. The gauges seem well made and the adapters are solid. To use this kit you have to be able to “zero out” the gauges. Normally this would mean removing a small plastic plug on the face of each gauge and turning the small flat head screw. The problem is the adjustment screws for the individual gauges. On my kit 3 of the 4 adjustment screws were stuck and would not move. Without the ability to zero out the gauges they are useless. The hole in the gauge face is too small to get a large screwdriver in and a small screwdriver doesn’t have enough torque to move the screw. Compound this with the screws themselves. They are made of soft metal and one was beginning to deform due to the force I was using. To remedy this I was able to remove the plastic faces of the gauges and use a number 2 flat head screwdriver and free up the adjustment screws. If you look closely at the face of the gauge you will see a small notch at the top. Rotate the notch down to an indent in the gauge body at the bottom. Then you can pry the gauge face out of the housing. Once the face is removed you can use a larger screwdriver to free up the adjustment screw. Then replace the face and perform the adjustment with a small screwdriver to zero out each gauge. See my pictures for the location of the notch on the face. Also I have a picture of the plastic plug that can be removed to access the adjustment screw. Once you free up the screws and have the ability to adjust the gauges to zero you will have a very nice set of synchronization gauges.
NickiNickNick –
Great kit for syncing up older bike carbs. Very useful!
Ian Santopietro –
All but one of the gauges arrived uncalibrated for my altitude. This is pretty normal where I live, but when I turned the synch screw on one of them that was incorrect, the needle won’t go low enough to set it to 0 . Thus, the meter can’t be used on anything with more than 3 cylinders, you’d have to synchronize them in batches.
Dawn –
These gauges didn’t work for me at all. There are no adjustments to zero them out and upon closer inspection the face plates are marked for things like cylinder compression and/or fuel pressure, wish I’d noticed that earlier. Trying to use this tool actually made my carb tune worse due to it’s inaccuracy. I did better just syncing them on the bench. I’d post a video of how bad these are but I just don’t care enough. Save your money, or buy a better tool. These are just junk designed to look like proper gauges. Sadly, I’m outside my return window or else these would definitely be going back.Zero stars.
DAN AVENAIM –
After using this to tune my Yamaha V-max1200, it ran better than it has in years.