Skip to content
Clear product details Fitment guidance Contact support
DriveSelect Compare the options that matter.

Transmission Slip Yoke 2-3-4871X Driveshafts Slip Yoke N2-3-4871X T2-3-4871HP 28 Spline Compatible with FORD C4, T10 Ranger 95-97 for 1310 Series U-Joint | Options and Comparison Guide

$29.99

SKU: E-B0CR1D28TL Category:

Comparison view: Compare Transmission Slip Yoke 2-3-4871X Driveshafts Slip Yoke N2-3-4871X T2-3-4871HP 28 Spline Compatible with FORD C4, T10 Ranger 95-97 for 1310 Series U-Joint with other Yokes options using this source-backed discriminator: Fitment: Compatible with 1310 Series SPI-5-153X,SPI-5-1310X,SPI-5-1310-1X U-Joint.

Use this second point to evaluate the tradeoff: Fitment:Compatible with various 28 spline Ford, Lincoln, Mercury transmission cases including AOD, C4, T-5, T-10, Top Loader, Tremec Tr3550, and some Transfer cases. Use a comparison lens: material, dimensions, compatibility, package scope, and upgrade tradeoffs.

Before you order
  • Confirm the part number, position, dimensions, and connector details shown on this page.
  • Compare the listing with the part currently installed on your vehicle.

Description

Comparison points and tradeoffs

When comparing Transmission Slip Yoke 2-3-4871X Driveshafts Slip Yoke N2-3-4871X T2-3-4871HP 28 Spline Compatible with FORD C4, T10 Ranger 95-97 for 1310 Series U-Joint with other Yokes options, use this source-backed detail as the primary discriminator: Fitment: Compatible with 1310 Series SPI-5-153X,SPI-5-1310X,SPI-5-1310-1X U-Joint.

Use this second fact to evaluate the tradeoff: Fitment:Compatible with various 28 spline Ford, Lincoln, Mercury transmission cases including AOD, C4, T-5, T-10, Top Loader, Tremec Tr3550, and some Transfer cases. A third point to compare across alternatives is: Specification:U-Joint Cap Diameter (A): 1.063 Inch; U-Joint Width (B): 3.219 Inch; Slip Yoke Length (C):(Center Line to End of Spline) 6.000 Inch; Barrel Diameter (D): 1.500 Inch; Spline Diameter (E): 1.220 Inch; Number of Spline (F)*: 28 (- see note below*).

Alternative-selection boundary

Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.

Complete source-backed product details

Source product highlights

  • Replace the OEM number: 2-3-4871X , N2-3-4871X , 3103-284 , T2-3-4871HP , 2-3-8251X Slip Yoke (Length 6.500 Inch)
  • Fitment: Compatible with 1310 Series SPI-5-153X,SPI-5-1310X,SPI-5-1310-1X U-Joint
  • Fitment:Compatible with various 28 spline Ford, Lincoln, Mercury transmission cases including AOD, C4, T-5, T-10, Top Loader, Tremec Tr3550, and some Transfer cases.
  • Specification:U-Joint Cap Diameter (A): 1.063 Inch; U-Joint Width (B): 3.219 Inch; Slip Yoke Length (C):(Center Line to End of Spline) 6.000 Inch; Barrel Diameter (D): 1.500 Inch; Spline Diameter (E): 1.220 Inch; Number of Spline (F)*: 28 (- see note below*)
  • NOTES: The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft. It can used on Front or Rear Driveshafts,You can use on a 1310 Series CV Driveshafts or Weld Yoke Style Driveshafts.

Product facts

Specifications

Canonical product
MP-US-B0CR1D28TL
Source product ID
B0CR1D28TL
Category
Replacement Parts / Transmission & Drive Train / Universal Joints & Parts / Yokes
Available images
8

Vehicle information

Available fitment details

Listing compatibility notes

  • 500 Inch) Fitment: Compatible with 1310 Series SPI-5-153X,SPI-5-1310X,SPI-5-1310-1X U-Joint Fitment:Compatible with various 28 spline Ford, Lincoln, Mercury transmission cases including AOD, C4, T-5, T-10, Top Loader, Tremec Tr3550, and some Transfer cases.
  • The blind spots do not affect the fit of the yoke on your output shaft.

Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.

Selection, alternatives, tradeoffs, upgrades, and direct replacements

Buying guidance

Quick decision

Use the supplied facts to compare this yokes with direct replacements and nearby alternatives.

Choose this if

  • The listed specifications and referenced numbers match the part you need.
  • The package contents cover the repair without missing required components.

Consider another option if

  • Your vehicle, connector, side, dimensions, or part number do not match the listing.
  • You need a different package quantity, material, or variation.

Before you buy

  • Compare the listing title, photos, package contents, and specifications with the part being replaced.
  • Confirm vehicle compatibility and installation requirements before ordering.

Customer feedback

Ratings and written reviews

Reviews below were submitted through this store.

Reviews

There are no reviews yet.

Be the first to review “Transmission Slip Yoke 2-3-4871X Driveshafts Slip Yoke N2-3-4871X T2-3-4871HP 28 Spline Compatible with FORD C4, T10 Ranger 95-97 for 1310 Series U-Joint | Options and Comparison Guide”

Your email address will not be published. Required fields are marked *