Description
Comparison points and tradeoffs
When comparing Partsam 2Pcs 7 Inch Round Led Trailer Tail Lights Red 17 LED w/Inner Reflex Lens Submersible Truck Trailer Bus RV UTE UTV Motorhome Rear Stop Turn Tail Brake Lights Lamps Sealed Surface Mount 10-30V with other Lighting options, use this source-backed detail as the primary discriminator: Item Weight: 1 pounds.
Use this second fact to evaluate the tradeoff: PARTSam brand package box is reinforced with compression-resistant materials to prevent damage during shipping. A third point to compare across alternatives is: Great for School buses and refuge haulers, Also compatible with almost All automobiles and devices equipped with a 10-30 Volt DC power source such as Semi Truck, Semi Trailer, Service Truck, Bus, Service Van, Utility Truck, Enclosed Trailer, Utility Trailer, Boat Trailer, Parade Float, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV Peterbilt, freightliner, international, mack and lorries etc.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
| Brand | Partsam |
|---|---|
| Color | Red |
| Specific Uses For Product | Bus Lights, RV Lights, Trailer Lights, Stop Lights, Brake Lights, Exterior, Rear Lights, Tail Lights, Taillights, Running Lights |
| Vehicle Service Type | Trailer, RV, Truck, Tractor, etc |
| Special Feature | Inner Built-in reflex reflector removes the need for a separate reflector |
| Wattage | 30 watts |
| Auto Part Position | Rear |
| Lens Color | Red Lens |
| Lens Material | Polycarbonate |
| Assembly Required | No |
| Manufacturer | Partsam |
| Model | 7 Inch Round Led Trailer Tail Lights Surface Mount |
| Item Weight | 1 pounds |
| Package Dimensions | 7.83 x 7.72 x 4.57 inches |
| Manufacturer Part Number | GTCV-1007283252 |
| Special Features | Inner Built-in reflex reflector removes the need for a separate reflector |
Product Description
PARTSam 7 Inch Round LED Tail Lights
IP65 Waterproof
- Free to use in heavy rain, this product helps keep your vehicle well-marked and ensures safety.
- Its epoxy-encapsulated electronics prevent damage from water and corrosion.
Package Content
- 2x 7″ round led tail lights with inner reflex lens, screws, and gaskets are included.
PARTSam brand package box is reinforced with compression-resistant materials to prevent damage during shipping.
Source product highlights
About this item
- Package includes 2pcs 7″ Diameter round waterproof Led transit light 17 LED, acts as brake, tail, and turn signal light; Surface mount to trailer with mounting gasket; 3-Wire design hardwires to trailer; 4-hole surface mount with Inner reflectorized lens; Hole to Hole Mounting Space: 6-1/4″ Inch
- HARDWIRED WITH 3 WIRES: White Wire – Ground, Red Wire – Stop/Brake Light , Black Wire – Running/Tail Light; NOTE: the brake light and the running light can not be used at the same time;
- The light is DOT (Department of Transportation) compliant for street legal lighting making it a great choice for your light needs.
- The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
- Great for School buses and refuge haulers, Also compatible with almost All automobiles and devices equipped with a 10-30 Volt DC power source such as Semi Truck, Semi Trailer, Service Truck, Bus, Service Van, Utility Truck, Enclosed Trailer, Utility Trailer, Boat Trailer, Parade Float, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV Peterbilt, freightliner, international, mack and lorries etc
Dr. Bob –
I replaced some bus lights. I thought they might be a little to bright. After a few weeks I really like them. The reflector in the center of the light can be visible from a long way off. I will update this review with any failure I have. I am not expecting any issues.
Becca –
Replaced our 2002 bluebird back turn signals with these. We opted to go for the bright option vs the dim option. You can see them very well in daylight so I can only imagine how bright they’ll be at night. I believe these lights come with 18 or 20 awg wires, I twisted & soldered then heat shrank the connections since bus wire was 12 awg. Screws were not included so I used metal to metal screws I already had and they worked perfectly.
Demetane –
Jai remplacé les feux arrieres de mon VR qui prenaient l’eau et qui rouillaient, en plus de produire un éclairage insuffisant. Par contre il faut mettre en série une résistance de 25 ohms et de 25 watts pour l’alimentation des clignotants pour leur fonctionnement adéquat afin de prévenir l’affichage dans le tableau de bord qu’il y a une ampoule défectueuse, puisque les ampoules del prennent moins de courant et trompe ainsi l’ordinateur du véhicule. Voir photos. Pour le VR il faut aussi prévoir un éclairage blanc lors de la marche arriere, parce que j’ai remplacé aussi les feux jaune par la meme occasion ceux-ci incluaient les feux de recul.
J. Eduardo Covarrubias O. –
Me gustaron las lámparas, muy buena luz pero a los dos meses de uso dejo de funcionar una lampara.
Tom Denton –
Look really nice and large
Eric –
These were easy to install on my 03 Bluebird All American RE and the are gorgeous as running lights but when I press my brakes they go. out. I was told I needed to by another piece by a 3rd party and the Partsam hasn’t responded yet. Good luck
Paul marshall –
Extremely bright. Almost obnoxious at night
Charlotte –
Bright, functions well and good quality.
John J Marzo –
Work great
Camille Rivera –
Great for our camper