Description
Comparison points and tradeoffs
When comparing Kus 85mm Tachometer Gauge RPM REV Counter with Hour Meter 3000RPM with Backlight 12V/24V (3K-Black+Black) with other Tachometers options, use this source-backed detail as the primary discriminator: IP67 Waterproof and dustproof grade. Work up to 1m underwater.
Use this second fact to evaluate the tradeoff: Manufacturer Part Number: EL0996. A third point to compare across alternatives is: A hole with 85mm(3-3/8″) dimension and 55mm(2-3/16″) depth on dashboard or an extra gauge holder. Screw-mount style installation. If you need gauge holder, pls. search for B07M8TMZW2.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
| Manufacturer | KUS |
|---|---|
| Brand | ELING |
| Item Weight | 14.1 ounces |
| Product Dimensions | 3.35 x 3.35 x 2.17 inches |
| Country of Origin | China |
| Manufacturer Part Number | EL0996 |
Product Description
Technical Data
-Speed Ratio: 0.5-250 adjustable
-Suitable for diesel engine
-Functions: current tacho/RPM and hour, hourmeter cannot be reset.
-Operation mode: LCD display, stepper motor
Easy to install.
– Cut an 85mm (3 3/8″) hole in the panel and allow a clearance of 55mm (2 3/16”) behind the panel to fit the gauge.
– Put the gauge in the hole and screw down.
How to be setting Tach RPM Ratio?
1. Turn on the power supply first.
2. Press and hold the mode button for 3 seconds to enter the setting speed ratio mode. then adjust speed ratio from 0.5-250 according to your request.
3. After setting, Data is automatically saved.
4. Please note: If your sensor is installed on the flying wheel panel, the RPM ratio is equal to the number of gears of the engine; If the speed signal takes from W-Terminal, the RPM ratio is equal to the half of the number of poles.
5. Normally, When the engine at idle state, tachometer shows 600-800rpm that means speed ratio is correct. If not, you can turn down or turn up speed ratio to check RPM difference.
Why Don’t get RPM signal?
Tachometer sometimes cannot get signal by ignition system. So, I suggest Tacho sensor signal. It is more stable.
I suggest you can buy a Tacho sensor from Eling Parts. ASIN NO. is B07RR8NQ45, B07RN3HJ72.
Package Includes:
1x Tachometer
1x Multi-plug socket
1x Installation Instruction
Source product highlights
About this item
- A hole with 85mm(3-3/8″) dimension and 55mm(2-3/16″) depth on dashboard or an extra gauge holder. Screw-mount style installation. If you need gauge holder, pls. search for B07M8TMZW2
- Red or yellow backlight. 9-32VDC(12VDC/24VDC) Working Voltage
- Diesel Speed Ratio: 0.5-250.0 adjustable, You can press the back button to adjust it. Idle speed is typically 600-800rpm. Details refer to owner manual.
- Suitable for diesel and gasoline engine. Tachometer can get signal from engine, ignition coil, crankshaft sensor, or tacho sensor (be sold separately), etc. If you need tacho sensor, pls. search for ASIN NO. B075NL55CQ or B075NDSB2T
- IP67 Waterproof and dustproof grade. Work up to 1m underwater.
Reviews
There are no reviews yet.