Description
Comparison points and tradeoffs
When comparing Universal P7100 Throttle Swap Kit, Includes 36′ Cut-to-Length Cable, Swap Brackets, Return Springs, Compatible with Cummins 5.9L 12V Engine 6BT 4BT Pumps with other Throttle Controls options, use this source-backed detail as the primary discriminator: Universal P7100 Throttle Swap Kit Package Contents 36″ Cut-to-Length Throttle Cable Return Springs Swap Brackets Mounting Screws and Washers Installation Steps 1.
Use this second fact to evaluate the tradeoff: Features: Engineered to fit with the stock fuel shutoff solenoid, this kit avoids interference and allows for a clean, professional installation, reducing the need for modifications in your fuel system. A third point to compare across alternatives is: Product identity: Universal P7100 Throttle Swap Kit, Includes 36′ Cut-to-Length Cable, Swap Brackets, Return Springs, Compatible with Cummins 5.9L 12V Engine 6BT 4BT Pumps.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
Universal P7100 Throttle Swap Kit
Package Contents
36″ Cut-to-Length Throttle Cable
Return Springs
Swap Brackets
Mounting Screws and Washers
Installation Steps
1. Preparation
Turn off the engine and ensure a safe working environment.
For easier installation, you may choose to remove the P7100 pump from the engine.
2. Remove the Tamper-Proof Bolt
Most P7100 pumps have a tamper-proof bolt on top of the timing pin housing. Use the appropriate tool to remove this bolt, allowing for easier throttle arm installation.
3. Install the Throttle Arm Assembly
Attach the throttle arm assembly to the P7100 pump using the provided screws and washers.
Make sure the return spring is positioned correctly, so the throttle arm automatically returns when released.
4. Adjust the Throttle Cable Length
Measure the desired length for the throttle cable and trim it if needed.
Connect one end of the throttle cable to the throttle arm and the other end to the throttle pedal, ensuring there is no slack in the cable.
5. Check Fuel Shutoff Solenoid Clearance
After installation, verify that the throttle arm clears the fuel shutoff solenoid.
For 4BT engines, if the stock lift pump interferes with the throttle arm, remote-mount the lift pump or contact a professional for throttle arm modifications.
Source product highlights
- Simplified Throttle Solution: Replace the stock, complex throttle kit for P7100 pumps with this universal throttle swap kit, designed for straightforward installation and ease of use
- Complete Component Set: Featuring a 36-inch throttle cable that can be cut to your desired length and a return spring setup
- Features: Engineered to fit with the stock fuel shutoff solenoid, this kit avoids interference and allows for a clean, professional installation, reducing the need for modifications in your fuel system
- Compatibility: Compatible with P7100 6BT pumps, while 4BT users may need a remote-mounted lift pump to clear space due to design constraints
- Note: Rremoving the tamper-proof bolt on the timing pin housing may be required for easier installation
Reviews
There are no reviews yet.