![Auto Ventshade [AVS] Aeroskin Hood Protector | Fits 2017 - 2019 Ford Escape | Low Profile Deflector / Bug Shield - 1 pc., Smoke | 322131](https://imaginebroward.org/images/imagesall/images_0/images/I/51y/51yS69FmbiL._AC_SL500_.jpg)
Description
Comparison points and tradeoffs
When comparing Auto Ventshade [AVS] Aeroskin Hood Protector | Fits 2017 – 2019 Ford Escape | Low Profile Deflector / Bug Shield – 1 pc., Smoke | 322131 with other Bug & Hood Shields options, use this source-backed detail as the primary discriminator: Model: Auto Ventshade 322131.
Use this second fact to evaluate the tradeoff: SKINTIGHT — Shields your vehicle from the hazards of the road with a protective, hood-hugging fit. A third point to compare across alternatives is: Item model number: 322131.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
| Manufacturer | Auto Ventshade |
|---|---|
| Brand | Auto Ventshade |
| Model | Auto Ventshade 322131 |
| Item Weight | 2.17 pounds |
| Product Dimensions | 46.75 x 11.81 x 2.94 inches |
| Item model number | 322131 |
| Is Discontinued By Manufacturer | No |
| Exterior | Smooth |
| Manufacturer Part Number | 322131 |
| OEM Part Number | 322131 |
| Position | Front |
Why rely on lesser hood protection with chintzy fasteners and unreliable performance? Stop damage before it happens with the Aeroskin Hood Protector by AVS. It provides the ultimate protection from road hazards while flowing seamlessly with the contours of your vehicle for a sleek, aerodynamic look you’ll love. With the lowest profile design on the market, the Aeroskin hugs the hood of your car with a skin-tight barrier your hood will appreciate. Installation is a breeze – no drilling or special hardware required. Attach it with the included 3M automotive-grade adhesive and hit the road. Available in dark smoke, chrome, and matte black finishes and proudly made in the USA with global materials.
Source product highlights
- FITMENT | 2017 – 2019 Ford Escape
- LOW PROFILE — Offers the lowest profile protection available and constructed from impact-modified acrylic.
- SKINTIGHT — Shields your vehicle from the hazards of the road with a protective, hood-hugging fit.
- CUSTOMIZED FIT — Engineered to fit the exact year, make, and model of your vehicle that complements your ride’s appearance.
- EASY TO INSTALL | No drilling or special hardware required. It mounts in minutes using the pre-applied 3M automotive-grade adhesive tape.
![Auto Ventshade [AVS] Aeroskin Hood Protector | Fits 2013 - 2018 Hyundai Santa Fe | Low Profile Deflector / Bug Shield - 1 pc., Smoke | 320052](https://imaginebroward.org/images/imagesall/images_0/images/I/415/415KRmMQm7L._AC_SL500_.jpg)
![Auto Ventshade [AVS] Bugflector II Hood Shield / Protector | Fits 2009 - 2014 Ford F-150 | High Profile Bug Deflector - 1 pc., Dark Smoke | 25940](https://imaginebroward.org/images/imagesall/images_0/images/I/31L/31LykCIgJDL._AC_SL500_.jpg)
Krylos –
This particular implementation of a bug deflector sits almost directly on the nose of the hood. There is barely any air gap between the deflector and the hood. In addition it is very important to get the front edge flush with the hood because the width of the hood must exactly match the sticking tape on the top side of the deflector or it will not hold adhesion. I was off about 1/ 4 inch and the passenger side will probably require additional adhesive tape.I actually prefer the old style deflectors that have about 1/2 to 1 inch Gap between the deflector and the hood surface. The old design may allow for some dirt to get in there, but it also allows for you to clean it out. With this new design I do not believe that it will be possible to clean underneath of the deflector at all. So if mud or small rocks get in, they would be trapped permanently.The composite material is similar to all of the other Hood deflectors I have used. There are no attachments screws involved, it is 100% sticky foam tape.Some people will like this new type of design and some won’t. I just wish that I had understood the particular implementation before my purchase. I was expecting the same type that I have on my CX-9 which basically sticks to the top of the hood and rises about 1 inch above the surface allowing it to potentially deflect rocks away from the Upper hood surface before they can reach it. This new design seems to only protect the nose of the hood.
Ron –
At first I was spectacle that this item would adhere well without using any of the vehicle screws. So far it has been great (1 month). It is a bit tricky to get it on and make sure that you can get the tape backing off. I can see that this might be difficult for some people to get right and if they don’t the item won’t last long. I made sure the vehicle was clean and dry. I also made sure the temperature was around 60 degrees or better for a couple of days before mounting. Then I left it in the sun for an hour or so. Only time will tell but so far it looks great and is functioning as desired.
Sheldon Fudge –
Perfect Fit for my Ford Escape, Looks Great
Richard –
Utilisation personnelle
kyle galvin –
Easy install, took me literally 2 minutes, nice and sealed to the hood so it doesn’t look cheap and keeps debris out, if anyone gave it less than 5 stars is because they suck at life and shouldn’t be around automobiles
jim m. –
A bit pricey, but fits perfect.
denns the menance –
Looks good , just make sure your alignment is right. It’s different than other hood protectors but contours good looks like it came from the factory!!
Customer –
We have put these Hood Protector on three different Escapes… With all the crap in the roads, And the cost of these fancy tri-coat paint jobs… Damn sure well worth it !!!
Lil bit –
They were easy to install and make our suv stand out now.
Mike –
Pretty simply to put on, as all products of this type, test fit, test fit, test fit. After your test fit and you’re happy with it, clean the area as best as you can with supplied products, I wiped the area down afterwards with a micro-fiber cloth, and then peel back tape, put the product on and finish removing tape…Follow the instructions… Press it down and you’re good to go. I waited a few days for everything to set properly before I took it to the car wash.I’m happy so far.
Joe Patterson –
Worked perfectly! Easy to install.
Daniel –
Good Quality, easy to install.