Description
Comparison points and tradeoffs
When comparing EVIL ENERGY 6AN PTFE Fuel Hose Line E85 Nylon Braided 10FT Black an6 Fuel Line 5/16 Inch ID with other Fuel options, use this source-backed detail as the primary discriminator: [Size and Installation] 6AN PTFE fuel hose ID: 0.31inch ; OD: 0.45inch.Length: 10 feet. Installation instructions are included. Please measure before purchase!
Use this second fact to evaluate the tradeoff: [Universal Compatible]: The ptfe braided fuel hose can be compatible with transmission fluid, diesel, biodiesel, engine oil,E85 gasoline, methanol, water, diesel and fuel. A third point to compare across alternatives is: Material: Nylon, Polytetrafluoroethylene (PTFE).
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
| Brand | EVIL ENERGY |
|---|---|
| Material | Nylon, Polytetrafluoroethylene (PTFE) |
| Color | Black |
| Product Dimensions | 120″L x 0.31″W |
| Item Weight | 0.51 Kilograms |
| Maximum Pressure | 10000 Pound per Square Inch |
| Nominal Wall Thickness | 0.075 inches |
| Outside Diameter | 0.47 Inches |
| Item Length | 10 Feet |
| Manufacturer | Speedwow Tuning |
| Item Weight | 1.12 pounds |
| Manufacturer Part Number | KT01451AN6BK-3-AMZ1 |
Product Description
-
-
Marine Fuel Hose
Conforms to USCG Type A1-15 SAE J1527. Widely used for supplying fuel to motors in boats or marine.
-
Transmission Oil Cooler Hose
Conforms to SAE J1532. Provides a safe, heat and oil resistant connecting between oil cooler and transmission or engine.
-
NBR Rubber Fuel Hose Line
Conforms to SAE 30R7. Widely used as a fuel line, emission control line, fuel return line, etc.
-
Fuel Injection Hose
Conforms to SAE 30R9. Wildly used in fuel line, return line, fuel pump, EFI, LS swap, etc.
-
PTFE Hose End Fitting
Only work with PTFE fuel line. Designed by 360° swivel for easy assembly.
Source product highlights
About this item
- [Size and Installation] 6AN PTFE fuel hose ID: 0.31inch ; OD: 0.45inch.Length: 10 feet. Installation instructions are included. Please measure before purchase!
- [Temperature and Pressure Range]: 6AN fuel line working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 1500 psi. Bursting pressure: 4500psi.Minimum bend radius:88.9mm(3.5inch).
- [Universal Compatible]: The ptfe braided fuel hose can be compatible with transmission fluid, diesel, biodiesel, engine oil,E85 gasoline, methanol, water, diesel and fuel.
- [Suitable for Widely Usage]: The 6an PTFE hose can be used as fuel injection hose, boost line,carb fuel line, ls engine swap fuel line, fuel return line, vapor return line,vacuum line, fuel supply line, etc.
- [Note] 6AN braided fuel hose relatively hard, it can’t be bend and folding in half. Professional installation is highly recommended.For optimal performance, we recommend using Evil Energy’s PTFE fittings.
AB –
Perfect exactly as described
Jose G. –
Redid my 99 Suburban rotting fuel lines to AN line from engine to tank including vent lines. Install was easy, and so far no leaks. It survived a Chicago winter and hopefully many more.
Hussain Sulaybi –
Good part
Stephen McIntyre –
Great products by Evil Energy! The pricing is great, quality seems great, and 2-day shipping was a big plus!I’m doing a frame-off restomod on my 1975 International Scout II and just used Evil Energy PTFE hoses, fuel filter and fittings for custom fuel lines. I installed a GM 5.3 liter LS motor and a 33 gallon aftermarket fuel tank with a high-pressure fuel pump. The Evil Energy hoses and fittings were easy to work with and went together easily. I plan on using this brand for the transmission lines.
Ib Sørensen –
Good produkt.
cofend –
It’s good quality for the price.
Brian S. –
Got this fuel line to run from the hard line to the carb on my ‘67 pickup. Looks to be nice quality for the money. Braiding looks good and is reasonably durable. Rubber hose itself seems to be pretty good.Hint: get yourself some shrink sleeves to put on the end after you cut it. Helps to give it a more finished look and keep the ends from fraying.
Undra Robinson –
Great price and the best quality I’ve found for fuel lines.
Larry –
Works well and reasonably priced
Omar Soto –
Great quality. Did not fit my AN6 fitting. Maybe a special fitting?