Description
Comparison points and tradeoffs
When comparing 5041A Front Axle Seal Installer Tool 5041 fit for Dana 44/60 fit for Chrysler Dodge Jeep Ram with other Axle Tools options, use this source-backed detail as the primary discriminator: Model: Axle Seal Installer Tool.
Use this second fact to evaluate the tradeoff: ✴️【Product Function】An handy and effective tool for seal replacement. Some customers also pointed out that it can be applied on both the driver side and the passenger side. A third point to compare across alternatives is: Package Dimensions: 19.09 x 3.78 x 3.46 inches.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
| Manufacturer | Bzumperyz |
|---|---|
| Brand | Bzumperyz |
| Model | Axle Seal Installer Tool |
| Item Weight | 3.5 pounds |
| Package Dimensions | 19.09 x 3.78 x 3.46 inches |
| Item model number | 5041A-3 |
| Manufacturer Part Number | AA-5140A |
For installing front axle seals.
Source product highlights
- ✴️【Product Function】An handy and effective tool for seal replacement. Some customers also pointed out that it can be applied on both the driver side and the passenger side.
- ✴️【Fitment】For Chrysler/Dodge/Jeep/Ram vehicle models. Suitable for Dana 44/60 model.
- ✴️【Feature】Use this tool to install front axle seals into Dana models 44 and 60 disconnect axles to their proper depth. Also used with 8411, 8415, 8416, 8417A & 8834. There are different assembly for different kinds of installations as you needed.
- ✴️【Installation】1. Install the front axle seal first, then insert the tool from the outside of the front axle. 2. Fully assemble the tool. 3. Tighten the nut with a wrench to push the seal into the correct position. 4. After the seal is installed, remove the tools. （Note: for reference only; Plz refer to your actual operation）
- ✴️【Material】Made of premium steel, provides longer service life and better performance.
michael charnecki –
The outer end of the installer got stuck in the tube opening. The inner cup did not fit the seal. In the end all I ended up using was the threaded rod part of it. You can buy threaded rod at your local hardware store for a few dollars.
Stan Gozzi –
It worked just as described. Easy to use. We were able to install the seal from the axle shift mechanism access
Madison Harquail –
Worked like a charm
Kelly N. –
Product is as expected. I am disappointed with Amazon’s choice to start using the postal service for Rural Delivery. It is taking twice as long to receive our items. Please go back to UPS.
Dan P. –
To long this will not work for a 1997 Dodge 2500 with a Dana 60Fedit, We were able to modify the tool by drilling the hole out the 0.750 and adding a spacer and did get it to work.
Alex L. –
Does not work on Dana 60 as advertised… tried it with my 2001 dodge ram 2500. OD of seal installer is too small to hold seal or housing. I had to fabricate some larger seal installers to work. Buy the expensive tool that’s right