Description
Comparison points and tradeoffs
When comparing 926-959 926-876 Engine Oil Cooler 3.6 Oil Filter Housing Assembly,Oil Cooler Housing For 2011-2023 Jeep Wrangler Cherokee,Dodge Charger Journey Challenger,Ram ProMaster,Chrysler 200 300 with other Engine Oil Coolers & Kits options, use this source-backed detail as the primary discriminator: Manufacturer Part Number: 926-876,926-959.
Use this second fact to evaluate the tradeoff: Application note: ✅For Ram Series:Oil filter housing compatible with 2013-2024 Ram 1500 3. A third point to compare across alternatives is: Item model number: 926-876, 926-959.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
| Manufacturer | HRepair |
|---|---|
| Brand | HRepair |
| Model | 3.6L Engine Oil Filter Cooler Housing Assembly |
| Item Weight | 5.39 pounds |
| Package Dimensions | 16.5 x 10.55 x 4.53 inches |
| Item model number | 926-876, 926-959 |
| Manufacturer Part Number | 926-876,926-959 |
Product Description
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
Source product highlights
- ✅Tip: If your car’s temperature sensor or power plug connector is not compatible with our products, you can simply replace it with the original sensor!
- ✅We offer free lifetime replacement and refund policy for ” 926-959 aluminum oil cooler”.
- ✅For Jeep Series:Oil cooler housing compatible with 2014-2021 Jeep Cherokee 3.2L;2020-2023 Jeep Gladiator 3.6L;2011-2023 Jeep Grand Cherokee 3.6L;2021-2023 Jeep Grand Cherokee L 3.6L;2012-2024 Jeep Wrangler 3.6L;2018 Jeep Wrangler JK 3.6L.
- ✅For Dodge Series:3.6 oil filter housing compatible with 2011-2014 Dodge Avenger 3.6L;2011-2023 Dodge Challenger 3.6L;2011-2023 Dodge Charger 3.6L;2011-2022 Dodge Durango 3.6L;2011-2020 Dodge Grand Caravan 3.6L;2011-2019 Dodge Journey 3.6L.
- ✅For Ram Series:Oil filter housing compatible with 2013-2024 Ram 1500 3.6L;2019-2023 Ram 1500 Classic 3.6L;2012-2015 Ram C/V 3.6L;2014-2023 Ram ProMaster 1500 3.6L;2014-2023 Ram ProMaster 2500 3.6L;2014-2023 Ram ProMaster 3500 3.6L.
- ✅For Chrysler Series :Oil filter housing compatible with 2011-2017 Chrysler 200 3.6L;2011-2023 Chrysler 300 3.6L;2021 Chrysler Grand Caravan 3.6L;2017-2023 Chrysler Pacifica 3.6L;2011-2016 Chrysler Town & Country 3.6L;2020-2022 Chrysler Voyager 3.6L.
Bo –
Nicely packaged. Everything included. Correct replacement for defective unit.
Ivor –
I like it
Ford Man. –
This is just another one of The long ongoing Dodge poor build quality and no value. These always break as Dodge builds poor quality vehicles and try and cover it up with a large advertising budget.
Katelyn –
The part will fit on a 2012 Jeep Grand Cherokee, but it will not function as there is no oil pressure relief valve. Part shipped is for 2014-2016. It also had some casting debris inside (aluminum shavings). Glad I did some more research before installing in my vehicle. 2011-2013 models require the pressure relief valve in the unit. This should not be stating it is compatible on these models.
Tom –
I saw a similar oil filter adaptor on a YouTube video and decided to replace my plastic oil filter adaptor just because. I am very glad I did. When I got down to removing the plastic adaptor I found it had been replaced before and it was beginning to fail and leak again. It was not serious yet, but it was on its way out. This aluminum replacement should end that problem in the future. One note: The screws, both on the one I replaced and the one I installed, are made of soft aluminum. Be very careful when tightening them down. They will not take much torque before stripping the torx heads. I had to drive a small regular socket onto the bolt heads to remove them from the plastic filter and stripped one during installation. The metal is very soft.
Mike D –
Chose this unit because of the positive reviews on here.Initial impressions seemed good until I looked closer. Very poorly finished inside. Metal shavings and casting flash was abundant. Please see my pictures to understand what I saw with this product.Not something I’d recommend to anyone.Having these pieces of metal in the oil passageways is terrible***Follow up***after all the prep work and cleaning of bad casting. I installed it.Started to leak after 800 KMS which got worse. The provided gaskets crushed and didn’t seal. Dumping out half the oil capacity on a short drive.Added pictures of what the original gaskets in the plastic housong look like compared to the provided aftermarket gaskets in this aluminum housing.Lost all confidence in this product.
Robin –
The oil cooler replacement procedure went smoothly. Everything seemed to work fine. Error codes cleared themselves. At 920km, the replacement failed and oil has been leaking everywhere. This is a very costly issue!! Why did this unit fail so quickly? It is not supposed to being all aluminum. The fact that now this job has to be done again within the span of 2-5 months is very aggravating. If the seller is listening, I want to know if they stand by their product and what they will to to help resolve this issue. I have no vehicle to get to work… the Jeep is dead in the water until I get another replacement. Not happy!
Jake –
One of the mounting holes had some kind of metal shavings that had to be pushed out, another hole was not straight all the way through and I had to redrill the hole.Overall 4 stars due to price, shipping, the rest of the quality was great!
Jason –
The part has been on now for just about a month and i have zero issues with leaking so far! Hope this was the fix I needed for the time being!
S. D. –
Great price. Made well. Comes with install bolts. Also comes with gaskets for intake and plenum.
Nick –
Fixed my 2012 JK Rubicon with the 3.6 liter engine. The old one was pouring coolant down onto the transmission and all over the street, and this replacement has been working perfectly for almost a year..
Coyote Rick –
The oil cooler fit perfectly and is a good upgrade for the plastic OEM cooler and the price is right!
Mike –
Freaky fast shipping, great part and easy fit