Description
Comparison points and tradeoffs
When comparing SX460 AVR Generic Replacement for Cummins SX460 Automatic Voltage Regulator | 2 Year Warranty! with other Voltage Regulators options, use this source-backed detail as the primary discriminator: SX460 AVR – Automatic Voltage Regulator – Exact Generic Replacement – 2 Year Warranty!
Use this second fact to evaluate the tradeoff: Category: Replacement Parts / Starters & Alternators / Alternators & Generators / Voltage Regulators. A third point to compare across alternatives is: Product identity: SX460 AVR Generic Replacement for Cummins SX460 Automatic Voltage Regulator | 2 Year Warranty!
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
Product Description
SX460 AVR – Automatic Voltage Regulator – Exact Generic Replacement
| INPUT | Voltage: Jumper selectable 95-132V ac or 190-264V ac, Frequency: 50-60 Hz nominal, Phase: 1 |
| OUTPUT | Max 90V dc at 207V ac input, Current: Continuous 4 A dc, Intermittent 6 A for 10 secs, Resistance: 15 ohms minimum |
| Regulation | +/-1.0% |
| Unit power dissipation | 0.05% per deg. C change in AVR ambient. | Unit power dissipation: 10 watts maximum – Build up voltage：4 Volts @ AVR terminals. |
Source product highlights
- CUMMINS is a registered trademark of Cummins, Inc.
- SX460 AVR – Automatic Voltage Regulator – Exact Generic Replacement – 2 Year Warranty!
- INPUT: Voltage: Jumper selectable 95-132V ac or 190-264V ac, Frequency: 50-60 Hz nominal, Phase: 1
- OUTPUT: Voltage: Max 90V dc at 207V ac input, Current: Continuous 4 A dc, Intermittent 6 A for 10 secs, Resistance: 15 ohms minimum
- Regulation: +/-1.0% * Thermal drift: 0.05% per deg. C change in AVR ambient
- Unit power dissipation: 10 watts maximum – Build up voltage：4 Volts @ AVR terminals
jose a –
poor range in voltage. Not more 200v.
Customer –
Works just as expected!
Rudder2 –
I bought this to upgrade my old 1984 Onan 8.0kW MDKD GenSet. It works AWESOME! The voltage has never been so steady! I need to readjust it to be 120V because I originally adjusted it when the GenSet was cold. This is a note…Let the GenSet warm up fully then dial in the no load voltage. It didn’t drop much, 3V AC which isn’t bad for a 120V GenSet…117V is well with in acceptable tolerance but I want the no load voltage to be perfect.I can’t wait to install the remote trimming potentiometer. This will allow me to make a +/- 10% from original set point adjustment from the boat’s power panel without changing the main adjustment. I like this idea. Probably not get used much, if at all, but having the option there is GREAT.It use to have an old transformer regulator and it worked great till the GenSet got overloaded because of a failure in the Air-Conditioning on my boat, it kept trying to start the compressor and would go in to thermal shutdown then cool off just enough to try again but every time it tried it drew more and more power because the compressor was hotter when it tried with out popping the circuit breaker, even though it’s the proper size, and then it just didn’t work any more. I was sleeping at anchor in August in Southern Florida and didn’t notice the change in Generator tone till it was too late…Was too tired and slept too soundly that night. Oh, well, it made me upgrade it to this awesome board that holds a tighter voltage then the original ever did!
Blessing H. –
Excellent product, happy customer
Kindle Customer –
Low cost & it works
dan –
Groupe électrogène
david chamberlain –
fits perfect
Dan –
Easy install no problems!
george benedict –
I have used this on a old coleman generator took some wiring and a little research it works great so far 5000 watt runs most of my house during a power outage highly recommend putting fuses in line
Peter –
Planta electrica
Tacun –
Repuesto económico y me desvaro