Description
Comparison points and tradeoffs
When comparing Z-GS-0795 Replacement Fuel Tank for DeVilbiss and Excell Generators Only – New Style for previous versions with access hole in top of tank with other Fuel Tanks options, use this source-backed detail as the primary discriminator: ONLY FOR USE ON: DeVilbiss and Porter Cable Generators Not for use as a replacement for any other part number other than GS-0795 Fuel tanks – Do Not Order for other applications.
Use this second fact to evaluate the tradeoff: BRAND SPECIFIC; Newly Design Extened Run Fuel Tank Replacement Kit with hardware “Brand Specific” Only for use on DeVilbiss and Porter cable generators. A third point to compare across alternatives is: The Z-GS-0795-AP is a newly designed extended run fuel tank with reinforced sidewalls and a new style tank seam that will allow us to offer a limited lifetime warranty on the fuel tank against any type of material or workmanship defects. This Z-GS-0795-AP Fuel Tank Replacement Kit will include the following items.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
The Z-GS-0795-AP is a newly designed extended run fuel tank with reinforced sidewalls and a new style tank seam that will allow us to offer a limited lifetime warranty on the fuel tank against any type of material or workmanship defects.
This Z-GS-0795-AP Fuel Tank Replacement Kit will include the following items:
- 1) Limited Lifetime Warranty against any defects in workmanship or materials
- 1) Z-GS-0795-AP Fuel Tank
1) N103455 Viton Tank Grommet - 1) GS-0437 Tank Drain Petcock
- 1) GS-0443 Fuel Cap
- 4) New Fuel Tank Mounting Screws
- 4) Fuel Tank Cushion Mounting Washers
- This fuel tank measures 22 Inches Long x 18 1/2 Inches Wide
- The tank mounting holes 16 inches apart on center and 3 inches on center from either end of the fuel tank
This Tank DOES NOT fit other brands of Generator
Order only if this is a direct Part Number Replacement for your Generator.
Returns are not accepted on this fuel tank.
Source product highlights
About this item
- BRAND SPECIFIC; Newly Design Extened Run Fuel Tank Replacement Kit with hardware “Brand Specific” Only for use on DeVilbiss and Porter cable generators.
- ZIPPERED SEAL: New zippered seam around the complete tank with reinforced walls, larger mounting surface, removal of seamed access hole.
- HARDWARE AND MOUNTING KIT INCLUDED: This fuel tank kit comes with all new hardware and mounting hardware including a new Viton Grommet and Fuel tank Pedcock
- ONLY FOR USE ON: DeVilbiss and Porter Cable Generators Not for use as a replacement for any other part number other than GS-0795 Fuel tanks – Do Not Order for other applications
- USA BASED – Allparts Equipment & Accessories takes pride in distributing our products in Southwest Michigan, USA. We are committed to delivering superior products that ensure performance, reliability, and durability. Additionally, Allparts offers 50+ combined years of top-tier USA based technical support to assist you with any questions or issues, ensuring you receive the best possible experience with our products.
Nathan A Hill –
Arrived on time Fits good.
Robin H. –
This gas tank was a perfect fit for my 10HP GB5000-2 Devilbis generator. I did not have to make any brackets to adapt it to the frame of the generator. When I bought the generator (used), it had a small, make-shift gas tank. I suspect the original tank was made of metal, and was rusting on the inside, which typically causes plugging of a fuel filter or carburetor. I was happy to see this replacement tank was made of plastic. It came with all the parts needed for replacement, including a filter. Excellent product.
Mike F –
Easy to install and came with all the necessary parts. Only issue is good and bad. The original tank had a hole over the spark plug so you could use a socket with a long extension to take out the plug, now I have to use the angled extension. The tank does hold more gas than the original so it is not a big issue.
James H. –
I wouldn’t call it poorly made, just not as nice as the original. The fit was slightly off. Didn’t need to make alterations, but the bolts barely catch the tanks mounting locations. I would likely still purchase it again though. They should drop the price some, or revisit the product quality.
Ben p. –
Was a great replacement for a split original tank on my generator
Jason Martin –
Fits great easy install.
David –
It’s a replacement and works ok.
California1 –
Our prior tank had seen better days. This one fit the bill! Perfect replacement. Happy with purchase.