Description
Comparison points and tradeoffs
When comparing BT-105SPT Brake Return Spring Tool/Truck Brake Spring Tool Fits for Install and Remove Retum Springs on Commercial Trucks and Trailers Replace for Spring Tech Tool with other Brake Adjusting Tools options, use this source-backed detail as the primary discriminator: EASY TO USE：Rotate the S cam – insure that the cam is rotated to seat the rollers are in the lowest position.
Use this second fact to evaluate the tradeoff: Push down on the handle and unhook the spring from the pin by pulling back or pushing forward on the handle depending on the direction of the spring opening. A third point to compare across alternatives is: NOTE:It Is Nota General Purpose Pry Bar. Do Not Attempt To Rotate The Cam Backwards With Auto Slacks Without Releasing The Pawl.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
lnstallation:
–Install both the roller and the roller retainers in both shoes.
– Install the return spring pins if required.
– Install the top shoe – insure that the cam is rotated to seat the roller in the lowest position.
– Hang the anchor springs from the top shoe.
– Attach the lower shoe, with the anchor springs, and then rotate the lower shoe into position.
– Install the retum spring on the lower shoe with the upper spring opening facing the roller.
– Slide the Brake Return Spring Tool between the shoe webs over the top roller and hook the top of the return spring below the upper coil.
– Push down on the handle and hook the spring over the pin by pulling back on the handle.
Source product highlights
- FUNCTION：This tool is used to install and remove retum springs on commercial trucks and trailers.Unique design cups the return spring to stop it from sliding off and possible injury. The return spring can be removed and installed safely, quickly and easily.
- EASY TO USE：Rotate the S cam – insure that the cam is rotated to seat the rollers are in the lowest position. Slide the Brake Return Spring Tool between the shoe webs over the top roller and hook the top of the return spring below the coil. Push down on the handle and unhook the spring from the pin by pulling back or pushing forward on the handle depending on the direction of the spring opening.
- HIGH QUALITY ： machined from high quality steel and coated with black powder to prevent oxidation and rust and ensure unrivalled long life, extra long handle provides excellent stability.
- NOTE:It Is Nota General Purpose Pry Bar. Do Not Attempt To Rotate The Cam Backwards With Auto Slacks Without Releasing The Pawl.
Daniel –
Love it!
Alex –
Very good gets the job done
Phoenix –
Great unit. Thick and locks on spring well
Travis Gene Hale –
Handle came off on like the 3rd brake job I did. The metal holds up fine, I ended up makeshifting a handle. Could not recommend for quality though.
Bishop –
I opened the box and it’s all scratched up. The condition of the handle is fine, but it looks like the handle could slip off any day now. I would have expected something like this if it were half off, but not worth the full price…
Ricky –
Cant wait to use it.