Description
Comparison points and tradeoffs
When comparing 3/8′(10mm) U-cut Molded Curved Fuel Line Rubber Hose Elbow 45 90 135 180 degree bend-3/8 fuel line(45 90 180 135 degree bend turn angle) with other Fuel options, use this source-backed detail as the primary discriminator: [COMPATIBLE WITH]:3/8 molded fuel line Suitable for fuel systems of various vehicle models, Suitable for3/8“（10mm）hose bars and hard fuel supply lines from the fuel tank to the carburetor.
Use this second fact to evaluate the tradeoff: Application note: About this item [COMPATIBLE WITH]:3/8 molded fuel line Suitable for fuel systems of various vehicle models, Suitable for3/8“（10mm）hose bars and hard fuel supply lines from the fuel tank to the carburetor. A third point to compare across alternatives is: Category: Replacement Parts / Belts, Hoses & Pulleys / Hoses / Fuel.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
Product Description
PACKAGE INCLUDES
- 3/8 fuel line(45 90 180 135 degree bend turn angle)
SIMPLE INSTALLATION
You can cut the fuel line hose into bends of 45 degrees, 90 degrees, 135 degrees, and 180 degrees. You can cut any part of the hose and use any part, simply trim it to length or shape, and then tighten it with a hose clamp (not provided).
PRODUCT SPECIFICATIONS
Inner Diameter:3/8″(10mm) ；Outer Diameter: 0.65″ 3/8 molded hose:Max working pressure 50 psi Burst pressure 250psi.Temperature Rating:-40°F to 257°F (-40°C to 125°C)
HIGH-QUALITY
Made from high-quality materials for ultimate durability. Fiber Reinforced NBR Nitrile Rubber.3/8 fuel line is resistant to high temperature and acid and alkali. It can work for a long time in high temperature environments and resist the erosion of various chemicals.
Source product highlights
About this item
- [COMPATIBLE WITH]:3/8 molded fuel line Suitable for fuel systems of various vehicle models, Suitable for3/8“（10mm）hose bars and hard fuel supply lines from the fuel tank to the carburetor.
- [PRODUCT SPECIFICATIONS]:Inner Diameter:3/8″(10mm) ；Outer Diameter: 0.65″ 3/8 molded hose:Max working pressure 50 psi Burst pressure 250psi.Temperature Rating:-40°F to 257°F (-40°C to 125°C)
- [SIMPLE INSTALLATION]:You can cut the fuel line hose into bends of 45 degrees, 90 degrees, 135 degrees, and 180 degrees. You can cut any part of the hose and use any part, simply trim it to length or shape, and then tighten it with a hose clamp (not provided).
- [HIGH-QUALITY]:Made from high-quality materials for ultimate durability. Fiber Reinforced NBR Nitrile Rubber.3/8 fuel line is resistant to high temperature and acid and alkali. It can work for a long time in high temperature environments and resist the erosion of various chemicals.
- [NOTE]:3/8 fuel line is widely used:Gasoline Hose, PCV Valve, Fuel Injection.Widely used in Boat, Hot Rod, Classic Car, and Motorcycle Tanks.Please confirm that the parts are the correct ones you need before purchasing. If you are not sure, please contact us for verification.
Ryan Cornell –
Had to rerun a fuel line on my truck that had some issues. Rather than pay $700 for a whole new fuel line assembly was able to buy this to made the 90 and and loop I needed to repair my existing line. Months later the truck is running great with typical fuel pressure so no issues at all with the product.
Preston –
Hose worked great for a transmission cooler add on for my truck!
KS –
I used the 180 degree bend part of this hose to replace a split emissions vapor canister hose on my truck. Worked perfectly. The OEM hose could not be purchased separately, I would have had to buy a replacement canister for over $500. Bending a straight piece of tubing resulted in a kink, so this preformed bend was exactly what I needed.
rod –
Arrived from the good ol’ US of A three days early, works a treat and I’ve got spare bends should I need them, 🤔 why doesn’t someone this side of the pond supply similar? Great service too. 👌
Jim OBrien –
Just what I needed Used 3 different places . I definitely would buy again
Rufus –
Good
MSS –
Has most any bend in a hose you could ever need. Very high price.
Ibel A. Medina –
Quality seems great and you can cut it up to fit many applications. One thing I didn’t like was that the hose is slightly larger diameter than the fittings which leaves a loose fit. You will need hose clamps. Other than that it fit and works great
john t. sanders –
This is not fuel line!