Description
Comparison points and tradeoffs
When comparing AUXLIGHT 1157 2057 2357 7528 BAY15D 1400 Lumens Super Bright Low Power LED Light Bulbs Replacements for Back Up Reverse Lights and Tail Brake Stop Parking Lights, 6000K Xenon White (Pack of 2) with other Brake Lights options, use this source-backed detail as the primary discriminator: 30,000+ hours lifespan: Full aluminum material housing for better cooling and built-in intelligent IC driver for stable output current and safer circuit. No radio interference, zero warm-up time.
Use this second fact to evaluate the tradeoff: 5.10 minutes installation: compatible for both CK/SRCK and Standard socket, non-polarity, just plug and play. A third point to compare across alternatives is: 4.Making with high-quality materials: full aluminum material housing for quicker heat dissipation and the base applies flame retardant material to avoid the damage, increasing your driving safety.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
Why to choose AUXLIGHT 1157/2057/7528 LED bulbs?
1.Brighter and Cooler color: super bright 6000K xenon white instead of dim yellowish color.
2.Dual-function for the brightness: high intensity light output for brake/turn signal light (1400 lumens), low intensity light output for tail/parking light/DRL (200 lumen).
3.Unique 360 degrees beam pattern design: 33 pieces 5730 LED chips are around the body of the bulb for maximum light output, 300% brighter than stock bulbs.
4.Making with high-quality materials: full aluminum material housing for quicker heat dissipation and the base applies flame retardant material to avoid the damage, increasing your driving safety.
5.10 minutes installation: compatible for both CK/SRCK and Standard socket, non-polarity, just plug and play.
Important Notice:
1.For some vehicle, you might need load resistors or flasher relay to prevent the hyper flash or no flash when the replacement for turn signal blinker lights, due to LED bulbs draw much lower power than halogens.
2.Please check the original bulb size before placing an order. Asking a question with your car model on “Customer questions & answers” if you are not sure which bulb will fit your car.
One-Year Warranty:
1.One year hassle free warranty, no hassle on return or replacement.
2.Any other problem please feel free to contact us, we are always here to fix the problem for you.
Source product highlights
About this item
- Specification: (Pack of 2) Voltage: DC 12V-24V, Working Power: 8.5W, Color: 6000K Xenon White, Lumen: 1400 LM/PC for high intensity, 200LM/PC for low intensity, Lifespan: 30,000+hours, Waterproof: IP67.
- 3 times Brighter than halogen/stock bulbs: Each 1157 2057 LED bulb comes with high illumination and high quality 33 pieces 5730 LED chips, 360 degrees bright light with HD projector lens increase the brightness and visibility.
- 30,000+ hours lifespan: Full aluminum material housing for better cooling and built-in intelligent IC driver for stable output current and safer circuit. No radio interference, zero warm-up time.
- Easier and Safer use: Same base as halogen bulbs, compatible for both CK/SRCK and Standard socket, non-polarity, just plug and play. Fit for 1157 2057 2357 7528 BAY15D 1016 1034 1034A 1034LL 1034NA 1035 1157A 1157ALL 1157LL 1157NA 1157ST 1178A 1196 198 2057A 2057ALL 2057LL 2057NA 2357A 2357ALL 2357LL 2357NA 2397 3496 7528L 94 etc.
- Application: Back Up Reverse Lights, Brake Stop Lights, Tail Lights, Turn Signal Blinker Lights, Parking Lights, Daytime Running Lights(DRL), Side Marker Lights etc. (for some vehicle, you might need load resistors or flash relay to prevent the hyper flash or no flash when the replacement for Turn Signal Blinker Lights).
Alex Griffith –
Installed these in my 2006 Mazdaspeed6. On the vehicle these will induce hyperflash so you will need to have a parallel 6Ω of resistance for each turn signal bulb you replace. For my vehicle I installed a 3Ω 50W load resistor on each side in the rear of the car, which was enough to solve the hyperflash for all four lights. For the front bulbs (1157) the polarity was inverted from what I needed and since it’s a barrel style connector I had to work around it by snapping some tabs on the little bracket to allow me to rotate them to the correct polarity. There’s nothing to complain about on the bulbs themselves. They are bright but not overbearingly so and seem to be put together well. The color looks just right for a turn indicator and there is no visible flicker.
Krzysztof Jasiurkowski –
I got those bulbs because they supposed to have canbus inside it so I should required add another canbus but no good. They flicker all the time.
Customer –
The media could not be loaded.
Customer –
I purchased one type of Auxlight and tried it on a 2006 Jeep to make sure I didn’t have any electrical issues, and to make sure the brightness and performance was good. In this case better than the original incandescent. Everything worked very well.From there, I purchased all bulb replacements and stuck with the Auxlight brand to ensure continuity in components and electrical integration. Everything worked well.I also purchased dome lights to replace the original halogen. I’m not happy with the bright white and would prefer a softer color – maybe 4,500 or so. But the lights work very well, draw less energy, and there is no heat buildup.I had one problem with one of the light sets – the box was previously opened, torn and clearly returned. The lights did not work correctly, and I assume they didn’t work to begin with and were returned, restocked, and sent back out to me. This is an Amazon stock issue, not an Auxlight issue.Confident 5 stars on this brand.
A Customer –
These LED lamps are just what I needed to increase the visibility of my motorcycle. They dropped right in, very bright, making me more easily seen by others. Everything work just fine, no changes needed to the motorcycle.
kawardeep sidhu –
It’s easy to install & make the thing brighter. But, they got fused in short time.
Jean –
Bought for my classic car tail light/ brake lights. 1157 led red. Really happy with first impressions as far as brightness. Much improved over the old filament style bulb for classic cars. I only used in the rear lights so didn’t have to worry about flasher. It did speed up flashing a little for turn signal but I think that was a good thing more noticeable.
Ismael p. –
Lo que esperaba
Customer –
Don’t fit as they say