Description
Comparison points and tradeoffs
When comparing Compression Release Valves for High Compression Harley V-Twin Motors – Synthetic Knobs that stay cool to the touch and automatically close after start-up – 10mm x 1.0 Thread Pitch – SOLD AS A PAIR with other Valve Parts options, use this source-backed detail as the primary discriminator: Product identity: Compression Release Valves for High Compression Harley V-Twin Motors – Synthetic Knobs that stay cool to the touch and automatically close after start-up – 10mm x 1.0 Thread Pitch – SOLD AS A PAIR.
Use this second fact to evaluate the tradeoff: SOLD AS A PAIR. A third point to compare across alternatives is: Compression Release Valves are designed to lower the compression during hot-starts by reducing the pressure imposed on the starter motor and battery.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
Compression Release Valves are designed to lower the compression during hot-starts by reducing the pressure imposed on the starter motor and battery. Simply push the caps down to open the release valves, start the engine, and the valves will close by themselves. (They have 5-7 Newtons of closing force) The molded synthetic knobs ensure they stay cool to the touch and are easy to operate unlike other machined knobs once they get hot. INSTALLATION NOTE: These valves require you to remove the head and machine a M10 x 1.00 threaded-hole next to the spark plug. SOLD AS A PAIR: 10mm x 1.0 Thread Pitch, 1-13/32″ Overall Length with 10mm of Thread
Source product highlights
About this item
- Compression Release Valves are designed to lower the compression during hot-starts by reducing the pressure imposed on the starter motor and battery.
- Simply push the caps down to open the release valves, start the engine, and the valves will close by themselves. (They have 5-7 Newtons of closing force)
- The molded synthetic knobs ensure they stay cool to the touch and are easy to operate unlike other machined knobs once they get hot.
- INSTALLATION NOTE: These valves require you to remove the head and machine a M10 x 1.00 threaded-hole next to the spark plug.
- SOLD AS A PAIR
- 10mm x 1.0 Thread Pitch, 1-13/32″ Overall Length with 10mm of Thread
Toughnuttocrack –
Deceptive description
Lucas Walters –
Great