Description
Comparison points and tradeoffs
When comparing DipYourCar.com Plasti Dip Dissolver – Finish Remover, Striper, and Cleaner for Plastic Dip Painted Cars – Liquifies and Removes Dip to Thin to Peel (32 oz Spray Bottle) with other Paint Remover & Stripper options, use this source-backed detail as the primary discriminator: INSANE QUALITY: DipYourCar is your all in one source for plasti dip car paint jobs. We have DIY sprays, kits, accessories, and tools perfect for any level of experience. Get the most advanced, highest performing protection for your car from DYC!
Use this second fact to evaluate the tradeoff: EASY TO USE: Just spray a full coat over the dipped area and let it sit for 60-90 seconds then apply one more coat and wait another 60 seconds and the dip will be liquified. Now the dip will be easy to clear away with a power washer. If you’re removing Plasti Dip from multiple sections we suggest working one panel at a time until you’re finished. A third point to compare across alternatives is: Product identity: DipYourCar.com Plasti Dip Dissolver – Finish Remover, Striper, and Cleaner for Plastic Dip Painted Cars – Liquifies and Removes Dip to Thin to Peel (32 oz Spray Bottle).
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
Product Description
Source product highlights
About this item
- FASTER EASIER REMOVER: Dip Dissolver is the perfect tool for any areas of your Plasti Dip or HyperDip coating where the layers are too thin to be removable. Don’t waste your time peeling small sections of thin dip, use Dip Dissolver!
- FASTER. SAFER. STRONGER: Our Dissolver works faster and easier than anything else. Our exclusive formula is made of 90% active ingredients (compare to 40% standard) for faster action that’s formulated to be safe on the paint under your dip.
- EASY TO USE: Just spray a full coat over the dipped area and let it sit for 60-90 seconds then apply one more coat and wait another 60 seconds and the dip will be liquified. Now the dip will be easy to clear away with a power washer. If you’re removing Plasti Dip from multiple sections we suggest working one panel at a time until you’re finished.
- EVERYTHING YOU NEED: Check out a full selection of accessories and tools for maintaining your peelable removable Plasti Dip and aerosol HyperDip. We have everything you need to apply your automotive dip coatings and get the most out of them!
- INSANE QUALITY: DipYourCar is your all in one source for plasti dip car paint jobs. We have DIY sprays, kits, accessories, and tools perfect for any level of experience. Get the most advanced, highest performing protection for your car from DYC!
AA –
This works. You may have to do a few rounds, and make sure to use a powerful pressure washer cz it will make your life way easier.
Jonathan s. –
At first I bought one bottle but I ended up using two. Came off after about 3 applications but man was this a life saver. Highly recommend and it works wonders on glass surfaces. Only thing I didn’t like was the price but as the old saying goes cheap work and good and good work ain’t cheap
Udhey –
Love this product. It 100% works. If it doesn’t work for you means you didn’t apply is correctly. Highly recommend. Use this and 1800 PSI power washer
scott –
It does work, my bumpers were black plasti dip, it started getting nicks and peeling off in places so it was time to remove it. It takes about 3 to 4 applications. I used a 3m green scrub pad, a scrub brush, a screw on pressure nose, and for the stubborn spots a plastic puddy knife. It took about 45 min to do both bumpers. Plasti dip definitely does not peel off like the brand sas Spary it once, let it sit for about 5 min, hit it with the scrub brush. Spay again and use the scru brush again. It should be mostly liquid. Spray it down with the hose. Respray the remaining areas with the solvent. Let it sit for a couple min. Scrub with the 3m pad. Rinse with water. Whatever remain spray agsin with the solvent, let sit, use whichever tool u need to to remove the last bit. Rinse. Done. It wasnt too time consuming or difficult. I posted a pic of the remover bottle and how much I had left after 2 bumpers. Worth the $$
Byron Bader –
Applied just as directed and it didn’t take off any of the plasti dip on my rims (maybe 5%). Tried a few times just to make sure. Didn’t work at all.And it’s non refundable too! At that price, it better work amazing and come with a money back guarantee if it doesn’t. Garbage, garbage, garbage. Do not buy.
Rramil –
I was skeptical before I used this product. I got tired of my plastidip rims and decided to pull the trigger on this. I sprayed it before going to a self-wash. When I hit it with a pressure washer, the plastidip peeled right off. I had to spray it a few times to get the most of it and I would say this saved me so much time.
Gregory Hilton –
Pricey but works well. Wasn’t fully perfect. It removed a bunch of the old plastidip but there were definitely some little parts that wouldn’t be removed at all, even with a second and third attempt with the spray directions. But luckily those spots were weak enough to be removed with some goo gone
Kourtnei Finnell –
The media could not be loaded.
Gabe –
Product works very well. Soaked my rims and was able to pressure wash the dip right off. For the tough spots I did have to soak a second time. But was able to take off the dip easily.
Sacha Proctor –
If you make any Plasti-Dip mistakes or oversprays or want to undo what you did, this stuff is amazing. It’s expensive, but it’s worth it. It removes any need to peel off every little bit of extra Plasti-Dip and quickly removes any overspray quickly and easily. A huge time saver. If you’re going to Plasti-Dip anything, this is essential.
Simply irie 3 –
This thing works like a charm I used on my 350z with a terrible wrap to remove it it made removing it a easy task it takes some time but it’s way less effort then picking at a wrap piece by piece it’s well worth it will need at least 2 bottles to finish a small car
KRAM02 –
This may work great for metal parts but it’s apparently a solvent for adhesive as well. Ruined a $950 headlight assembly.
Stromi –
Genuinely works phenomenal. Had some dip ~6 years old and pretty thin + burned from UV. 2-4 sprays as suggested + plastic brush chucked in a drill took all the old dip off. Much better than rubbing it all off by hand