Description
Comparison points and tradeoffs
When comparing Drilled Front Brake Rotor Disc – Fits Honda CB450K CB750A CB750F CB750K with other Rotors options, use this source-backed detail as the primary discriminator: Manufacturer Part Number: FD-750-DR.
Use this second fact to evaluate the tradeoff: Item Weight: 7 pounds. A third point to compare across alternatives is: Application note: Diameter: 295mm | Thickness: 7mm Fits Honda: CB450K Super Sport – 1970-1971 | CB750A Hondamatic – 1976-1977 | CB750F Super Sport – 1975-1976 | CB750K Four – 1969-1978 Manufacturer 4into1 Brand 4into1 Item Weight 7 pounds Manufacturer Part Number FD-750-DR Position Front Reproduction drilled front brake rotor for the CB450K/750.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
| Manufacturer | 4into1 |
|---|---|
| Brand | 4into1 |
| Item Weight | 7 pounds |
| Manufacturer Part Number | FD-750-DR |
| Position | Front |
Reproduction drilled front brake rotor for the CB450K/750. Made to exceed OEM specifications. If the stock rotor is worn out or warped now’s the time to install a brand new one! Whether it’s for a restoration or a daily rider this is a great part especially if you’re building a complete new wheel. Remember to use Loctite on the bolts that hold the rotor and torque them to spec, then adjust the bracket that holds the caliper. It’s a good idea to replace the pads at the same time.
We also carry a non-drilled version of this rotor and complete kits for replacing the front brake system.
Replaces Honda Part Numbers: 45120-341-000, 45120-300-040, 45120-392-000
Diameter: 295mm
Thickness: 7mm
Fits Honda:
CB450K Super Sport – 1970-1971
CB750A Hondamatic – 1976-1977
CB750F Super Sport – 1975-1976
CB750K Four – 1969-1978
Source product highlights
- Reproduction drilled front brake rotor for the CB450K/750. Made to exceed OEM specifications. If the stock rotor is worn out or warped now’s the time to install a brand new one! Whether it’s for a restoration or a daily rider this is a great part especially if you’re building a complete new wheel. Remember to use Loctite on the bolts that hold the rotor and torque them to spec, then adjust the bracket that holds the caliper. It’s a good idea to replace the pads at the same time.
- Replaces Honda Part Numbers: 45120-341-000, 45120-300-040, 45120-392-000
- We also carry a non-drilled version of this rotor and complete kits for replacing the front brake system.
- Diameter: 295mm | Thickness: 7mm
- Fits Honda: CB450K Super Sport – 1970-1971 | CB750A Hondamatic – 1976-1977 | CB750F Super Sport – 1975-1976 | CB750K Four – 1969-1978
Reviews
There are no reviews yet.