Description
Comparison points and tradeoffs
When comparing Go Kart Centrifugal Clutch 18 Tooth 3/4′ Bore #35 Chain Compatible with Mini Bike and Go Kart Racing with other Clutches options, use this source-backed detail as the primary discriminator: Application note: There’s an internal bronze bushing behind the snap ring that requires lubrication Note: This is Non original aftermarket Replacement Parts, please check the size and the pictures carefully for Compatible with before ordering it.
Use this second fact to evaluate the tradeoff: Application note: Product Description Carkio Go Kart Centrifugal Clutch 18 Tooth 3/4″ Bore #35 Chain Compatible with Mini Bike and Go Kart Racing Go Kart Minibike Belt Direct Drive Fun Kart Centrifugal Clutch 3/4″ Bore 18 Tooth #35 Chain Fitment: Go-karts and Mini-bikes, clutch can mount inward or outward on crankshaft. A third point to compare across alternatives is: Note: This is Non original aftermarket Replacement Parts, please check the size and the pictures carefully for Compatible with before ordering it.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
Product Description
Carkio Go Kart Centrifugal Clutch 18 Tooth 3/4″ Bore #35 Chain Compatible with Mini Bike and Go Kart Racing
Go Kart Minibike Belt Direct Drive Fun Kart Centrifugal Clutch 3/4″ Bore 18 Tooth #35 Chain
Fitment: Go-karts and Mini-bikes, clutch can mount inward or outward on crankshaft.
Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation
Package Included: 1 x Go Kart Centrifugal Clutch 18 Teeth
Description
Description:
Product Name: Centifugal Clutch Mini bike go kart
Tooth:18
Shaft Bore : 3/4″
Chain model: #35 Chain
Size: Inner hole: Inner hole: 19.05mm, inch 3/4″, outer diameter 107mm, total height 55mm
Fitment:Go-karts and Mini-bikes, clutch can mount inward or outward on crankshaft.
Tip: Do not drain the oil in the clutch hole, the hole on the drum is to let the hot air out of the clutch. Do not spray oil in these holes. When oil enters the drum part of the clutch, it causes excessive slip, which means excessive heat is generated
The clutch needs to be lubricated, so oiling is very important, otherwise thermal damage will occur, which will be very dangerous. Regular oiling according to the usage
Where do you oil the clutch?Behind the snap ring, next to the sprocket teeth at the end of the clutch. There’s an internal bronze bushing behind the snap ring that requires lubrication
Note: This is Non original aftermarket Replacement Parts, please check the size and the pictures carefully for Compatible with before ordering it.
Source product highlights
- Go Kart Minibike Belt Direct Drive Fun Kart Centrifugal Clutch 3/4″ Bore 18 Tooth #35 Chain
- Fitment: Go-karts and Mini-bikes, clutch can mount inward or outward on crankshaft.
- Size: Inner hole: Inner hole: 19.05mm, inch 3/4″, outer diameter 107mm, total height 55mm
- Package Included: 1 x Go Kart Centrifugal Clutch 18 Teeth
- Carkio focuses on providing high-quality products and first-class services at reasonable prices. If you are not satisfied with our products, you can return them within 90 days.
Sean Brown –
This is a great clutch for the price. I have it on a 224cc built engine on a mini bike and it has held up very well for the past few months. I keep it oiled to help it last longer. I would definitely buy it again
Katarzyna Kruczak –
I just used this clutch and the stock back sprocket with a 212(18lbs springs and governor deleted) and I got 60mph with good bottom end. It’s the perfect 4.0 gear raito for the cheapest price.
Youssef –
Just got it a week earlier than the expected delivery date witch is one huge plus! Just waiting for my wheel hubs to come in so I can try it out, will post pictures and update in a few days!
Richard Phillip Pomeroy –
I needed a clutch that would stop my mini bike from doing wheelies. This clutch stopped them. You get the speed on the top end. I went from 12 teeth to 18 teeth on the clutch.
Michael –
Solid clutch been beating on it for half a year. About a month ago started oiling the clutch behind the c clip before every ride to prolong the life would recommend
Oswaldo C. –
It will get you going & they do last but clutch has to much side to side play, doesnt fit perfect in the 3/4 shaft. This is causing the pin to damage. But its still gets me on the road tho. Until pins decides to leave the chat haha, pther than that its a good clutch if lube it as well. Just wish it fits perfectly in the shaft.
Jessica Verstrate –
The media could not be loaded.
Matthew –
This clutch is for high speed so be careful if you have a 65 tooth sprocket you gonna be going pretty fast. I got my go kart up to 54 mph with it but my acceleration was bad and it would slip a lot when climbing and acceleration.