Description
Comparison points and tradeoffs
When comparing Hooke Road Tacoma Front Bumper Full Width Offroad Bumper w/Winch Plate & Skid Plate & LED Lights for Toyota Tacoma 2005 2006 2007 2008 2009 2010 2011 Trucks with other Bumpers options, use this source-backed detail as the primary discriminator: B: Modified Fog Light Installation : Align the four holes. Use the bolts and washers supplied. To install the Modified fog light brackets into the wings. (Modified fog light specification is the same as Jeep Wrangler JK 4-inch fog light on the market.).
Use this second fact to evaluate the tradeoff: 【Easy Install】- No cutting, drilling or modification required. Direct bolt-on upgrade replacement for your original stock bumper reusing the factory mounting points. Includes mounting hardware and detailed instruction. A third point to compare across alternatives is: Category: Replacement Parts / Body & Trim / Body / Bumpers.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
Product Description
Hooke Road Full Width Front Bumper
Front End Upgrade. Transform your truck into an even more capable off-roader with these bumpers. You can drive more aggressively and push your truck to its limits, no matter how rugged the roads may get
Sturdy and Long Lasting. Heavy-duty 11-gauge(1/8 inch) steel plate for bumper main body. Textured black powder coat finish & Premium E-coating process inside for durability and long-lasting corrosion resistance
Easy Bolt-on Installation. No cutting or drilling required. Mounting hardware included
Tacoma Front Winch Bumper Features
Front End Protection
- Rugged off-road design front bumper with a low-profile hoop.(Removable)
- Comes with a strong skid plate providing vehicle’s underbody protection.
Winch Plate
- Bumper comes with a winch plate that is rated up to 12,000 lbs.
- Made from 9-gauge (5/32 inch) steel plate for winch plate and mounting structure.
License Plate & D-rings Mount
- Equipped with a flip-up license plate mounting bracket.
- High strength d-ring mounts welded both inside and out with 4.75-ton capacity.
LED Lights Option
- Works with factory fog lights.
- Works with Jeep JK 4-inch aftermarket LED fog lights(lights not included). But requires 2× fog light brackets.(Included)
| Application | for 2005 2006 2007 2008 2009 2010 2011 Toyota Tacoma pickup trucks |
| Winch Plate | The bumper comes with a winch plate that rated up to 12, 000 lbs |
| Solid Contruction | Heavy-duty 11-gauge(1/8 inch) steel plate for bumper main body, 9-gauge(5/32 inch) steel plate for winch plate and mounting structure |
| Exterior Finish | Textured black powder coat finish & Premium E-coating process inside for durability and long-lasting corrosion resistance |
| Package Content | Tacoma Front Bumper, 2× Mounting Brackets, Winch Plate, 2× Fog Light Brackets, License Plate Mount Bracket, Skid Plate, Mounting Hardware Kit, Installation Instruction |
| Bumper Weight | This Toyota Tacoma front bumper weight is about 98 lbs |
Tayota Tacoma Front Bumper Installation Guide
1. Fog Light Installation: Take out the fog light from the factory bumper. Unplug the light wire.
A: Factory Fog Installation: Put the factory fog light into the bumper and install them with bolts supplied.
B: Modified Fog Light Installation: Align the four holes. Use the bolts and washers supplied. To install the Modified fog light brackets into the wings. (Modified fog light specification is the same as Jeep Wrangler JK 4-inch fog light on the market.)
2. Front Bumper Installation:
Step 1: Stick the EVA into the main body. To assemble the wings & the main body.
Step 2: To install the bull bar. Then install the mounting brackets. Don’t tighten up those bolts.
Step 3: To install the winch bracket. Tighten up the bolts. Then to install the license plate bracket.
Step 4: Lift up the bumper into your vehicle. Install it into with the factory bolts. Keep the bolts loose, raise the bumper, adjust the gap between it and the car, and then tighten the bolts, after confirming that the desired effect is achieved.
Step 5: To install the skid plate. The installation is complete.
If you have any questions or need further assistance during the installation process, feel free to contact our customer support team. Happy off-roading with your new Hooke Road Bumper!
Source product highlights
About this item
- 【Application】- Hooke Road full width front bumper for 2005-2011 Toyota Tacoma Regular Cab | Access Cab | Double Cab models
- 【Full Protection】- 3-piece modular design tacoma front bumper. Rugged off-road design with a low-profile hoop provides excellent protection. Perfectly follows the body lines
- 【Practical Design】- Bumper features a solid skid plate. Equipped with a flip-up license plate mounting bracket. Works with Tacoma factory fog lights and Wrangler JK 4-inch LED modified fog lights (not included)
- 【Off-road Use】- Comes with a winch plate that rated up to 12, 000 lbs. Features high strength D-ring mounts. D-rings are not included
- 【Heavy-Duty Construction】- Heavy-duty 11-gauge (1/8 inch) steel plate for bumper main body, 9-gauge (5/32 inch) steel plate for winch plate and mounting structure. Front bumper weighs about 98 lbs
- 【Durable Coating】- Textured black powder coat finish & Premium E-coating process inside for durability and long-lasting corrosion resistance
- 【Easy Install】- No cutting, drilling or modification required. Direct bolt-on upgrade replacement for your original stock bumper reusing the factory mounting points. Includes mounting hardware and detailed instruction
- 【Warranty】- Manufacturer warranty for 2-Year from date of purchase. Lifetime customer support from Hooke Road
Alex Layman –
unboxed and it looks great, but just about every single part has paint missing or scratches or like gouges. Still going to run it, but just want to note mine did come in damaged already
Customer –
I installed this on my 4th gen 4Runner 4wd and it fit perfectly with 2 small modification. You need to dill 1 hole on each frame bracket because the Tacoma brackets have 3 bolts and the 4Runner has 4 bolts. Everything else just lines up with no issues. I will update if I have any issues.
Pixie –
The media could not be loaded.
Customer –
This works great with a 4th gen 4runner with drilling and extra hole in the mounting brackets. I think it looks pretty good and is definitely the cheapest way to get a winch bumper on a 4th gen! The powder coating is sub par and flaked away a little but for the price it can’t really be beat.Edit: this DOES NOT work with a standard steel cable fairlead. So make sure you get a synthetic rope fairlead and rope so it will fit.
Dan –
I was hesitant buying an imported kit bumper, and had my doubts about the structural integrity under any actual load. Those doubts were put to rest when some tweaker cut me off and i couldn’t hit the brakes quick enough. Destroyed their ride, only minor scuffs to my bumper. 10/10 for the price
Enrique Porth-Bohn –
Thks
Alan –
Really like how this looks on my truck. No problems with condition due to shipping. Only reason for 4 stars because of not great instructions. I had better luck looking up install videos on YouTube. Also I already banged my knee on front tow hooks. Take some getting used to I guess. Bumper is heavy but truck seems to ride better with it. Verdict still out on gas mileage effect.
Nathan Murphy –
I knew I was buying a cheap bumper but come on. 25$ in new nuts and bolts from the hardware later and I got fog lights. Pre assembled very very loosely. 3 stars for price and availability. Chinesium