Description
Comparison points and tradeoffs
When comparing RecPro RV Suburban 10 Gallon Direct Spark Water Heater | Gas & Electric | 16 7/32′ H x 16 7/32′ W x 20 1/2′ D | Insulated Tank | 12V DC | 120V AC | 12K BTU (White Door with Black Switch) with other Water Heaters options, use this source-backed detail as the primary discriminator: Technical specifications – Our SW10DE model offers 12K BTU power level and uses both gas and electric heating systems for rapid recovery rates. The gas direct spark ignition runs on 12V DC and the electric heating element runs on 120V AC.
Use this second fact to evaluate the tradeoff: Measuring at 16 7/32”H x 16 7/32”W x 20 1/2”D, this 10-gallon water heater is the perfect size for any small space. And with its light dry weight of only 46 pounds, it won’t add any unnecessary weight to your vehicle. Once filled with water, its full weight is approximately 129 pounds. A third point to compare across alternatives is: Full weight: approx 129 pounds.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
Introducing the Suburban Water Heater – the perfect solution for your hot water needs. Whether you’re in a camper, motorhome, or RV, this gas and electric water heater is designed to provide you with hot water anywhere and anytime. With its compact and efficient design, you’ll never have to worry about running out of hot water again.
The Suburban Water Heater is proudly made by one of the most trusted names in the industry – Suburban. This means that you can expect nothing but the best in quality and performance. It is designed to be hardwired, eliminating the need for a plug and outlet, making installation hassle-free.
Measuring at 16 7/32”H x 16 7/32”W x 20 1/2”D, this 10-gallon water heater is the perfect size for any small space. And with its light dry weight of only 46 pounds, it won’t add any unnecessary weight to your vehicle. Once filled with water, its full weight is approximately 129 pounds.
This water heater used a 12-volt DC direct spark ignition gas heating system and a 120-volt AC electric heating element. This technical data shows that the water heater provides a 12K BTU level and consumes 1440W of power. The recovery rate for electric heating is 6.1 gallons/hr, while the gas heating recovery rate is 10.1 gallons/hr.
Please note that mounting hardware is not included with the water heater, but it does come with a flush mount door and switch that are available in black or white to complement your vehicle’s aesthetic. Don’t miss out on the opportunity to experience hot water on the go with the Suburban Water Heater. Order yours today and enjoy the comfort and convenience of hot water wherever you go!
*Should be installed and serviced by a qualified service technician*
*Failure to properly maintain and/or winterize unit will void warranty*
Details:
- Suburban made
- Gas and electric water heater
- Designed to be hardwired, no plug and outlet needed
- Dimensions: 16 7/32”H x 16 7/32”W x 20 1/2”D
- Cutout dimensions: 16 3/8”H x 16 3/8”W x 20 3/4”D
- 10 gallon capacity
- Dry weight: 46 pounds
- Full weight: approx 129 pounds
- CSA certified
- Tank is insulated
- Porcelain-lined, steel tank
- Replaceable anode rod
- Pressure relief valve
- Plastic fill tubes on hot and cold water fittings to enhance water circulation
- Water temperature set to maintain at 135°F (57°C)
- Non adjustable, use caution when using hot water
- Comes with manufacturer warranty
- Mounting hardware not included
- Flush mount door and switch available in black or white
- SW10DE model
-
- SW – Suburban water heater
- 10 – 10 gallon
- D – 12 volt DC direct spark ignition gas heating system
- E – 120 volt AC heating element
Technical Data:
- 12K BTU level
- 1440W consumption
- Recovery rate – electric: 6.1 gallons/hr
- Recovery rate – gas: 10.1 gallons/hr
- 12V DC Direct spark ignition gas heating system
- 120V AC heating element
Source product highlights
About this item
- Compact and efficient – Our RV water heater has a dry weight of 46 pounds, making it easy to install and transport. The insulated tank is porcelain-lined for durability and includes a replaceable anode rod for extended life.
- Experience ultimate convenience – No need for a plug or outlet, our water heater is designed to be hardwired directly into your RV. It’s CSA certified and features plastic fill tubes on the hot and cold fittings to enhance water circulation.
- Temperature controlled – Set at 135°F (57°C), our water heater maintains a consistent temperature for your comfort. Trust in the safety of a pressure relief valve and non-adjustable heat setting. Plus, it comes with a manufacturer warranty!
- Technical specifications – Our SW10DE model offers 12K BTU power level and uses both gas and electric heating systems for rapid recovery rates. The gas direct spark ignition runs on 12V DC and the electric heating element runs on 120V AC.
Reviews
There are no reviews yet.