Description
Comparison points and tradeoffs
When comparing Repair Kit Fit SR250D SR250C Oxygen Regulator Replace Victor Part #0790-0048 with other Oxygen options, use this source-backed detail as the primary discriminator: Condition: New Manufacturer Part Number: 0790-0048 Brand: Jetuplusllc Part Type: Repair Kit.
Use this second fact to evaluate the tradeoff: Category: Replacement Parts / Sensors / Oxygen. A third point to compare across alternatives is: Repair Kit Fit SR250D SR250C.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
Condition: New
Manufacturer Part Number: 0790-0048
Brand: Jetuplusllc
Part Type: Repair Kit
Source product highlights
- Part Type: Repair Kit
- Diaphragm Assembly (6), Nylon Gasket (8), Seat Assembly (9), Friction Ring (12)
- Parts included in the kit are the Diaphragm #0730-0024, Seat Assemble #0740-0010, Friction Washer #1408-0033, and Nozzle Gasket #1408-0086.
- Replace Victor Part #0790-0048
- Repair Kit Fit SR250D SR250C
Vehicle information
Available fitment details
Listing compatibility notes
- Replace Victor Part #0790-0048 Repair Kit Fit SR250D SR250C Condition: New Manufacturer Part Number: 0790-0048 Brand: Jetuplusllc Part Type: Repair Kit
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Selection, alternatives, tradeoffs, upgrades, and direct replacements
Buying guidance
Quick decision
Use the supplied facts to compare this oxygen with direct replacements and nearby alternatives.
Choose this if
- The listed specifications and referenced numbers match the part you need.
- The package contents cover the repair without missing required components.
Consider another option if
- Your vehicle, connector, side, dimensions, or part number do not match the listing.
- You need a different package quantity, material, or variation.
Before you buy
- Verify the referenced part number: 0790-0048.
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.4 / 5
45 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
ednj –
This item is listed as victor kit 0790-0048 but it is missing one of the most important gasket that is in the piston! I have attached the pic. Get the OEM kit for few bucks more has this gasket already installed. Check the other listing
Huckle –
Between the time your regulator goes bad, and by the time you order, receive, and then install the repair kit, you may forget how the pieces go back together.Also, when the regulator quits regulating pressure, the high pressure (bottle pressure) will most likely have destroyed your line pressure gauge, Order a new gauge or you’ll be just guessing where to set the regulator.
Vrock –
I seldom use my torch setup. My gauges are old and when I went to use the setup, the Victor 250 oxy regulator popped. So I installed another old regulator a Victor 450, it also popped. Years ago I had a professional rebuild my Oxy regulator and it cost me $70…… So I purchased two different rebuild kits and fixed both my old regulators. You can do this.
John –
Most important part of this kit is the “Seat”. This seat leaked immediately, albeit very slowly. This means that it leaks from the tank side to the torch side and you can watch the pressure slowly creep up. NOT GOOD!! If you have one of these slow leaking seats you might not notice and then leave your regulator under pressure for a few minutes while you’re in between cuts and before you know it your Acetylene pressure is way over fifteen!!! NOT GOOD!!! Save your time and money and buy the Genuine Victor parts for a few dollars more. They’re not on Amazon but if your smart enough to rebuild your Regulator then your smart enough to find the Genuine Victor parts.
Gary Doughty –
Great transaction
Carlos Garcia –
The parts, exactly what I needed
Ken F –
This is easy to install but remember you’re working with oxygen and or acetylene. So be careful with your installation. It’s way cheaper than buying a new regulator. Don’t forget to check the numbers on your regulator before ordering.
Thomas H. –
Saved my regulator