Description
Comparison points and tradeoffs
When comparing Seal-Krete SK201001 Multi-Surface All-Purpose Water Repellent, Gallon with other Sealers options, use this source-backed detail as the primary discriminator: Product identity: Seal-Krete SK201001 Multi-Surface All-Purpose Water Repellent, Gallon.
Use this second fact to evaluate the tradeoff: With extreme water-beading abilities, the all-purpose coating does not yellow over time, dustproofs surfaces and cleans easily with soap and water. A third point to compare across alternatives is: Seal-Crete Multi-Surface All-Purpose Water Repellent is designed to provide protection for a variety of uncoated vertical or horizontal surfaces using a proprietary water-based formula.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
Product Description
Seal-Crete Multi-Surface All-Purpose Water Repellent is designed to provide protection for a variety of uncoated vertical or horizontal surfaces using a proprietary water-based formula. Low odor, low VOC acrylic dries quickly and resists moisture, oil stains, salts and hot tire pickup. With extreme water-beading abilities, the all-purpose coating does not yellow over time, dustproofs surfaces and cleans easily with soap and water.
From the Manufacturer
SEAL-KRETE MULTI-SURFACE acrylic water repellent is designed to provide protection for a variety of surfaces. It’s an excellent dustproofer, resists oil stains, protects against damage from moisture penetration and road salts and resists “hot tire” pick-up.
Source product highlights
- Ideal for protecting a variety of exterior uncoated surfaces without the use of wax including brick, pavers, concrete, stucco and wood
- Low odor, low VOC proprietary water-based formula provides excellent protection for horizontal and vertical surfaces
- Dries to the touch in 1 hour and covers up to 300 sq. ft. depending on surface porosity; recoat in 2 hours
- Non-yellowing acrylic grants extreme beading and resists moisture, oil stains, salts and hot tire pickup
- Applies milky white but dries clear; one coat for dustproofing and two coats for satin finish


Chuckmac –
I used it on the top course of a Hard Scape wall that was weathering. It seemed to seal it well and at this time I’m satisfied. The test of time will be the deciding factor.
Customer –
Great product
Corned Beef Bob –
The product is very good but the shipping was not. The first gallon I received was in a plastic bag in a box but it had leaked from the cap, not a lot but enough to leave the inside of the bag wet and the box had wet spots. I ordered two more 5 days ago with a note telling Amazon to make sure the cap was on tight. Both containers were in separate plastic bags that were not closed with any type of twist tie. Again the caps were lose and the product leaked in the bags AND in the box which also contained printer ink cartridges. Luckily the leakage did not get into the ink boxes. I am very upset that my message about tightening the caps meant nothing at all.
Victor K. –
Not used this gallon yet. I have used it b4 work great. That why I ordered it
Timothy Parker –
I’m not sure how well this works. The item was shipped in a sealed plastic bag inside a cardboard box. There was slight leakage but not enough to really be a problem. As another reviewer noted, the cap was shipped just slightly loose which accounts for the leakage.As far as usage, the directions indicate that it must be used in a temperature range of 50 to 90 degrees, so it seems to be usable for only half the year, and I bought it in the wrong half. Because of that, I haven’t used it yet, and with my project nearing completion I likely never will. I’ve used a different weatherproofer as a substitute.
DaveyJones –
Have used thsi product before and finde it weasy to apply, easy cleanup of applicators and durable.
Lois A. Peterson –
works well – gives a slight sheen to the pavers (I’m am amateur – so, working slowly – but, feeling good about the results).
Joe T. –
Great for sealing old chalky paint on aluminum siding before top coat. Actually it works on any siding or surface. You can also tint it. Read instructions. Great product, been using it for over 25 years.