Description
Comparison points and tradeoffs
When comparing Tiger Tool Brake Anchor Pin Press Made for Commercial Heavy Duty Trucks, Break Anchor Pin Press for Semi Trucks, Works on Class 6 – 8 Transportation Trucks & Equipment, 16002 with other Brake Adjusting Tools options, use this source-backed detail as the primary discriminator: ROBUST CONSTRUCTION & DESIGN: Featuring a sturdy C-frame with a 10-ton capacity, the Brake Anchor Pin Press is built from high-grade steel, ensuring both strength and longevity.
Use this second fact to evaluate the tradeoff: Manufactured from high-grade steel for strength and durability. A third point to compare across alternatives is: Safely and easily remove brake anchor pins and bushings on virtually all 16-1/2” S-Cam trailer and tractor “Q” brake systems in minutes.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
Product Description
Safely and easily remove brake anchor pins and bushings on virtually all 16-1/2” S-Cam trailer and tractor “Q” brake systems in minutes.
- No need to remove the hub or dust shield
- Rigid C-frame with 10-ton capacity
- Manufactured from high-grade steel for strength and durability
The compact design enables the operator to service brake anchor pins and bushings while the hub and dust shield remain on the vehicle. Don’t waste your time replacing rusted, seized or broken dust shield bolts; with the 16002, you need only focus on the task at hand.
Our press utilizes a 7/8” hex drive, meaning you don’t need any specialty tools for operation. And with an included bushing removal adapter, the Tiger Tool 16002 removes both the anchor pins and the bushings.
Your time is valuable
Doesn’t require the removal of the hub or the dust shield. Don’t waste your time replacing rusted, seized or broken dust shield bolts; with the 16002, you need only focus on the task at hand.
Practical & Accessible
Our press utilizes a 7/8” hex drive, meaning you don’t need any specialty tools for operation. And with an included bushing removal adapter, the Tiger Tool 16002 removes both the anchor pins and the bushings.
Source product highlights
About this item
- EFFICIENT MAINTENANCE: The Tiger Tool 16002 makes removing brake anchor pins and bushings a breeze on nearly all 16-1/2” S-Cam trailer and tractor “Q” brake systems, significantly reducing service time and ensuring a safe, damage-free process.
- WIDE COMPATIBILITY: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.). In the event you are servicing a stamped spider, a punch and chisel may be required to remove the bushing.
- ROBUST CONSTRUCTION & DESIGN: Featuring a sturdy C-frame with a 10-ton capacity, the Brake Anchor Pin Press is built from high-grade steel, ensuring both strength and longevity. Its compact design allows for efficient service directly on the vehicle, bypassing the need to remove the hub and dust shield, saving time, and avoiding the hassle of dealing with rusted or broken dust shield bolts.
- SIMPLE & ACCESSIBLE OPERATION: No need for specialized tools – the 16002 operates with a standard 7/8” hex drive and includes a bushing removal adapter. This design simplicity ensures that removing both anchor pins and bushings is straightforward, making it accessible to all technicians.
- NORTH AMERICAN CRAFTMANSHIP & INNOVATION: Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction.
Travis G –
Way quicker and easier than hammering and heating
HaabHauling –
This tool is literally worth it’s weight in gold. Match this with a 3/4″ impact and you can remove both anchor pins and bushings in 5 minutes or less as you get used to using this tool. Just make sure you have a 3/4″ drive 7/8″ deep 6pt IMPACT socket. The only way this tool could be better is if there was a female 3/4″ square drive directly cast into the tool rather than having to use a 7/8″ socket.
Brian Jones –
and now i think i’m the second guy that actually changes the pins for the whole company. only seen 2 pieces of equipment where the pins had been recently changed, so someone else, probly the only guy that was doing them, had been there somewhat recently. that said…this tool is an absolute beast, i have no doubts in this tool whatsoever. the pins i’m dealing with are frozen solid with deep groves. i usually stall out my matco 2779 or makita xtw08, smack the webbing the sleves are pressed into till i get a nice bang from the pin and tool releasing pressure, then stall out my impact again and repeat till i can send it the rest of the way out. i think it would take a 3/4 or 1″ gun to hurt this tool, but if she goes, she’s gonna go big and take you with it! my only fear other than finding out what it will take to actually break this tool, is how easy it could be to lose the 2 adapter pieces. i don’t know what the ring one is for and i’m too lazy to read instructions. the piece with the magnet is for the sleeves. the price is very painful, but once you have it in your hands you wont regret it… feels like 50# of finely ground forged unobtainium.
Richard Alberta –
Well built product. Made life a lot easier
Customer –
No dislikes
Calvin C Crewe III –
Had a 1993 lowboy and all of the anchor pins were rusted. The Tiger Tool with a 3/4 drive Milwaukee M18 made short work of all the pins. Would recommend to anyone doing a lot of brake jobs and running into rusted anchor pins.
Ken –
This press saved me so much my time and headache! As a professional mechanic needing to do brake jobs on semi trucks and trailers, this is a must have tool!
Slim –
Strong and easy to use. Highly recommended
snachtman –
Works great! Much easier and faster than doing the heat and beat method
Dean C. –
Better than the heat and beat method.
Eric Custer –
Excellent toll does a great job
jesus –
Works great, was using the recommended 3/4 impact(Milwaukee) but the anchor pins were stubborn not doing anything, ended up using the 1 inch hoping the tool didn’t explode on me slowly was getting it of … tuff tool no damage and did the job without having to heat or hammer it out, saves a to. Of time
Sean E. –
Purchased Tool To Remove Brake Anchor Bushings. It Didn’t Work Well On Split / Segmented Brake Housing. Tool was strong enough to bend the brake housing.This might work good on a solid housing but definitely not on a split. Gave 1 star because tool was robust