Description
Comparison points and tradeoffs
When comparing Vibration Damper Holding Tool Crankshaft Pulley Removal Shock Absorber, Compatible with Audi Seat Skoda VW 1.8 2.0 4V TFSi EA888, Replace T10531, With Carrying Case & Gloves with other Pulley Tools options, use this source-backed detail as the primary discriminator: Application note: Application: Compatible with Audi Seat Skoda VW.
Use this second fact to evaluate the tradeoff: Compatible with Audi Seat Skoda VW. A third point to compare across alternatives is: Package List.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
Product Description
Yuesstloo Vibration Damper Holding Tool Kit
Used to fix the timing chain drive sprockets while installing and removing the vibration damper on 4cyl 1.8L 2.0L 4V TFSI EA888 engines.
Convenient to carry and store.
Package List:
- Assembly of timing fixing bracket (T10351/1)
- Tightening screw pin (T10351/2)
- Flip tool (T10351/3)
- Flange nut (T10351/4)
- Crankshaft press block (T10368)
- Support fixing screw *2
- Comes with a carrying case, and we prepare a pair of gloves for you to wear when you are using these tools.
Application:
Compatible with Audi Seat Skoda VW.
Engine Codes (1.8L TFSI):
BZB, CDAA, BPU, BYT, CABA, CABB, CDHA, CDHB, CABD, DAJB, CJSA, CJSB, CJEB, CJEE, CJED, CYGA, CDAC, CJSC, CGYA, DAJA
Engine Codes (2.0L TFSI):
CAWB, CCZA, CBFA, CCTA, CDNB, CDNC CDND, CJXA, CJXE, CJXH, CHHB, CHHA, CULA, CFKA, DEDA, CHJA, CAWA, CCZC, CCZD, CPSA, CJKA, CJKB, CESA, CETA, CFPA, CNCD, CPLA, CYRB, CYRC; CNCE, CYNB, CYPA, CULB, CULC, CNCB, CWZA, CJXF, CJXC, CJHB, CJXB
Made of high quality material, with high strength, anti-rust, not easy to break.
Source product highlights
About this item
- The vibration damper holding tool is used to fix the timing chain drive sprockets while installing and removing the vibration damper on 4cyl 1.8L 2.0L 4V TFSI EA888 engines.
- Compatible with Audi Seat Skoda VW. OEM Equivalent Part Number: T10531.
- Convenient to transport and store. Comes with a carrying case, includes counter hold tool, tension pins, turning over tool, knurled nut. And we prepare a pair of gloves for you to wear when using the tools.
- Made of high quality material, with high strength, anti-rust, not easy to break.
- If there is some problem with our products, you can get help from us. Customer satisfaction is our top priority.
daniel escarcega –
Lo utilice en una range Rober,
Customer –
The threads for the crank are fine but the threads for the nut to hold the crank sprocket in place were not machined correctly and the nut would not thread down. The threads on the shaft were machined smaller than the nut so the nut would slide 3/4 the way down the threaded portion and I could not get the nut to start correctly on the remaining threads. This looks like a machining / setup error and may not affect all units.*** Update – was sent an entire replacement. The replacement was threaded correctly and works as designed. I was able to get the job done without the new unit and it worked well holding in the crankshaft sprocket and not letting it move around. Anyone taking the crank damper off, i would highly recommend using this tool (or something similar). ***
Marlon fuentes –
Trabajo bien
Customer –
Worked great nice quality
Customer –
Working on a timing chain replacement for MK7 GTI CXCA engine code. Turnover tool came in handy to put engine back in TDC after moving chain while loosening pilot valves. Definite value for the cost.
Paul –
The tool was used on 2014 Volkswagen Bettle.
Phil –
The OEM specialty tools are crazy expensive, so these are nice alternatives when you aren’t running a euro mechanic shop. I had some work to do on 2012 Audi A4 with a 2.0T CAEB engine, so this was expected to be just a single-use item and worked perfectly. Glad I didn’t waste the money on the OEM and have it on hand in case there is ever a round 2, 3….
Jensen –
As you can see in the picture, even the basic hole right angle machining is messed up.I believed there would be no problem, but I got screwed.Since it has been over 30 days since I received it, according to Amazon’s return policy, I should just throw it in the trash.
Michael Matienzo –
So initial review for this product is I’m not at all disappointed for the price. Now I have not used it but will be sure to make a review when I do. Definitely suggest this for any VW/Audi techs or people who are car savvy working on their own VW/Audi.