Description
Comparison points and tradeoffs
When comparing RecPro RV Rubber Roof Adhesive 8010 | 1 Gallon | Water-Based Universal RV Roof Glue | RV Adhesive (1 Gallon) | Made in USA with other Roof Coating options, use this source-backed detail as the primary discriminator: Package Dimensions : 8.35 x 8.19 x 7.28 inches; 8.84 Pounds.
Use this second fact to evaluate the tradeoff: Item model number : 8010. A third point to compare across alternatives is: Size: 1 Gallon, 2 Gallons.
Alternative-selection boundary
Choose an alternative when its stated identifiers, application, package, or specifications better match the requirement; no unverified competitor claim is introduced here.
Complete source-backed product details
- Package Dimensions
:
8.35 x 8.19 x 7.28 inches; 8.84 Pounds - Item model number
:
8010 - Date First Available
:
June 22, 2019 - Manufacturer
:
RecPro - ASIN
:
B07TBP8445
Product Description
This adhesive is versatile and can be applied using roll coating, brushing, or spraying. For spray applications, it is recommended to use an Aro 650095 4.25-inch air motor with a 30:1 ratio pump at 80 psi, paired with a 651-500 spray gun and a #651551 for easy cleanup, along with a 1565 spray tip with a 0.015-inch opening or comparable equipment. For maximum bond strength, a two-sided application is suggested.
When working with porous surfaces like fiberboard or plywood, the adhesive can be wet laminated by applying it and immediately pressing the materials together. For non-porous surfaces such as EPS or ISO, apply 4-5 mils of adhesive to both surfaces and allow it to dry for 20-30 minutes, depending on environmental conditions, before bonding them. The adhesive goes on white and turns clear once dry. To ensure proper adhesion, apply the adhesive to the roof deck, then firmly press the sheet down with a broom or roller.
Specs
| Color | White |
| Solvent | Adhesive |
| Type | Modified Acrylic |
| Net Weight | 8.50 lbs/gal |
| Coverage | 160-200 sq. ft/gal (1 side @ 8-10 mil) |
| Viscosity | 10,000-15,000 cps (Brookfield RVF) |
| V.O.C. | 5.97 g/L |
| Solids Content | 68% |
Source product highlights
About this item
- Universal adhesive for RV Roofing
- COLOR: White
- COVERAGE: 160-200 sq ft/gal (1side @ 8-10 mil)
- This adhesive can be applied by roll coating or by brush
- Made in USA
KENNETH PRATER –
They say you can use a brush,,,don’t. It will be to thick. Works great with a roller. Dry to tacky is 5 – 10 minutes and you can CAREFULLY put material down. I put pvcrubber roof on teardrop camper over wood and this glue really sticks. Just get bubbles out quickly and keep everything clean. Very happy with this glue.
Customer –
did the job i e
UJM81 –
I used this to retain some sheeting that used on the roof of my generator shed. It held as needed and so far has weathered both heat and storms.
Customer –
Used this for a major roof repair on a 40′ travel trailer. Easy to use, good coverage and solid finish.
47 willys –
Works well but you need to work fast on a hot day as it’s water based and you want both surfaces your trying to joint to stick
Lou modery –
This went on easy and in combination with the rubber roofing it stopped all the leaks on my porch roof.
Mike –
Good product
Country Girl 2 U –
This adhesive has to rate H-Quality! It is super super sticky, creating a forever bond! It is EZ to apply using paintbrush and rubber gloves! I tried the roller that didn’t go well. Hard to clean off, apply carefully. Cost effective!